Your Browsing History
- Free 30-day Returns
$89.00
Meet Your Seller
Dell Force10 CBL-QSFP28-100G-DAC-3M Compatible 100G QSFP28 Passive Direct Attach Copper (DAC) Cable, 3m (10ft)
- This Dell Force10 CBL-QSFP28-100G-DAC-3M compatible 100G QSFP28 passive Direct Attach Copper cable is a factory terminated 3 meter link for 100 Gigabit Ethernet. The QSFP28 connectors are fixed to the Twinax copper at both ends, so there are no transceivers to buy separately and no fiber ends to clean or align.
- Passive DAC uses almost no power and adds almost no latency, which makes it the default choice for in-rack and rack-to-rack 100G connections: leaf and spine switch links, top-of-rack switch to server, and high-speed storage uplinks. At 3 meters you get enough reach to cross to a neighboring rack or route through cable management without stressing the connectors. The cable is plug and play, hot swappable, and built to 100 impedance to hold signal integrity at 100Gbps.
- Operating range is 0°C to 70°C with storage from -40°C to 85°C, and the cable meets MSA, SFF-8665 and RoHS requirements. Each unit is programmed and tested on Dell Force10 equipment before it ships.
- Specification
- OEM Part Number Dell Force10 CBL-QSFP28-100G-DAC-3M Product Type 100G QSFP28 DAC Cable
- Form Factor QSFP28 to QSFP28 Data Rate 100Gbps / 100GbE
- Passive or Active Passive Cable Type Twinax Copper
- Cable Length 3 m (10ft) Cable Impedance 100
- Connector QSFP28/QSFP28 Installation Plug & Play, Hot Swappable
- Environment Operating: 0°C to 70°C, Storage: -40°C to 85°C Compliance MSA, SFF-8665, RoHS
- Key Features
- Dell Force10 compatible 100G QSFP28 passive DAC cable
- 3 m (10ft) Twinax copper, 100
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
This Dell Force10 CBL-QSFP28-100G-DAC-3M compatible 100G QSFP28 passive Direct Attach Copper cable is a factory terminated 3 meter link for 100 Gigabit Ethernet. The QSFP28 connectors are fixed to the Twinax copper at both ends, so there are no transceivers to buy separately and no fiber ends to clean or align.
Passive DAC uses almost no power and adds almost no latency, which makes it the default choice for in-rack and rack-to-rack 100G connections: leaf and spine switch links, top-of-rack switch to server, and high-speed storage uplinks. At 3 meters you get enough reach to cross to a neighboring rack or route through cable management without stressing the connectors. The cable is plug and play, hot swappable, and built to 100 impedance to hold signal integrity at 100Gbps.
Operating range is 0°C to 70°C with storage from -40°C to 85°C, and the cable meets MSA, SFF-8665 and RoHS requirements. Each unit is programmed and tested on Dell Force10 equipment before it ships.
Specification
| OEM Part Number | Dell Force10 CBL-QSFP28-100G-DAC-3M | Product Type | 100G QSFP28 DAC Cable |
| Form Factor | QSFP28 to QSFP28 | Data Rate | 100Gbps / 100GbE |
| Passive or Active | Passive | Cable Type | Twinax Copper |
| Cable Length | 3 m (10ft) | Cable Impedance | 100 |
| Connector | QSFP28/QSFP28 | Installation | Plug & Play, Hot Swappable |
| Environment | Operating: 0°C to 70°C, Storage: -40°C to 85°C | Compliance | MSA, SFF-8665, RoHS |
Key Features
- Dell Force10 compatible 100G QSFP28 passive DAC cable
- 3 m (10ft) Twinax copper, 100 impedance
- Supports 100Gbps / 100GbE high-speed connectivity
- QSFP28 to QSFP28 direct attach copper design
- Very low power consumption and low latency
- MSA and SFF-8665 compliant, plug and play, hot swappable
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Fiberopticdistribution Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...