4PCs Replacement Analog Joystick for PlayStation 4 Wireless Controller Repair Parts 3D Thumb stick Rocker Sensor for PS4, PS4 Slim, PS4 Pro DualShock 4 with Screwdriver Tool Kit

Please take a look at product ID: B0BK7169M8 for the desoldering kit, and B0BGPCCYH8 for solving drifting problem

EL6 ALPS 2.1K for PS5 and some PS4 controller

4x replacement analog joystick work with PlayStation 5 DualSense and some PS4 DualShock 4 wireless controllers. The thumbstick module was made by ALPS. This RKJXV stick controller series comes with 2.1K trimmer potentiometers. Were listing two ALPS models for PS4 and PS5. The difference is the resistance value of the potentiometers. You can distinguish them from the color of the side plastic. EL1 is 10K in gray, while EL6 is 2.1K in black or green. PS5 controller uses two kinds joysticks from two different manufacturers. EL6 was made by ALPS, while EL7 was from Favor Union (FU). Theyre interchangeable with each other

Replace the wiper alone even without soldering

In some cases, you can just replace the wheel in the potentiometer to solve specific problems like: Stuttering, dead zone, creeping, or not as responsive as it should be

Replace the potentiometer alone with an iron

80% chances of joystick problem are caused by the sensor. In another words, the rotary mechanism and the tactile switches are not the problem. De-soldering the unit with only 3Pin can be easier than replacing the entire module with as many as 14 prongs

A heat gun to replace the whole module

This is the most suggested for an experienced soldering expert

Experts with a normal iron to replace the whole unit

For a soldering expert with no professional de-soldering wick braid, solder sucker pump or hot air rework station at hand. To make it easy, we suggest crushing the problem joystick into small enough pieces with a pair of pliers

By professional technicians in a cellphone repair shop

Suggested for someone with no handy tools