The Conductonaut liquid metal thermal compound was developed for high-efficiency applications. The Conductonaut is recommended as a top product for experienced users who are looking for a solution with the best heat dissipation in the temperature range of over 8°C.
Technical Details
- Thermal Conductivity: 73 W/mk
- Consistency: Liquid
- Viscosity: 0,0021 Pas
- Density: 6,24g/cm3
- Recommended Temperature: 10 °C / +140 °C
Thermal Grizzly Conductonaut is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium, Conductonaut excels with a very high thermal conductivity. We recommend to apply Conductonaut on nickel plated surfaces since this will provide the best long term stability in performance.
C-001 tube can be used after 2 years of opening, but you need to keep it safe in appropriate conditions. An airtight sealable and reusable package to prevent drying out is included with the package.
It can work with almost any system either with air or with liquid nitrogen (down to 50 °C). Thermal Grizzly Conductonaut is recommended for applications that require extremely high thermal conductivity at room temperature e.g. between a silicon chip PC microprocessor and heat sink. The liquid metal compound compensates even the slightest irregularities, which can not be achieved with convenstional thermal greases.
IMPORTANT WARNING!
Conductonaut thermal grease must not be used with aluminum heatsinks! Conductonaut is a liquid metal compound and can leave visual residues. For best long term performance results we recommend to use coolers with nickel plated surface.
| Products | |||
|---|---|---|---|
| Conductivity | 73W/mK | 12.5W/mK | 14.2W/mK |
| Temperature Range | 10 °C / +140 °C | -250 °C / +350 °C | -250 °C / +350 °C |
| Capacity | 2g | 1g | 1g |
| IIncludes Cleaning Pad | |||
| Includes Applicator |
