Brand Thermal Conductive Grease Paste Silicone Plaster 450 Heat Sink Compound 100 Pieces Net Weight 1 Gram Golden Cold SY1

Brand Thermal Conductive Grease Paste Silicone Plaster 450 Heat Sink Compound 100 Pieces Net Weight 1 Gram Golden Cold SY1

Product Description

450 Thermal Paste

Color: Gold

Specific Gravity: 2.4 G/Cc

Operating Temperature: -58~464 Degrees Fahrenheit

Thermal Conductivity: 2.0 W/M-K

Product features: Apply to REACH and RoHS environmental protection requirements. High thermal conductivity, effective insulation, high temperature resistant, low oil departs non-corrosive.

Working principle: Fill the gap between heating element and the cooling device; Increase the contact area, so as to achieve the soundest effect of thermal conductivity.

Method of use: It's normal phenomena, there is a little silicone oil floating above. Please stir well before use. Keep be painted surface clean, and painted directly with tools (such as syringe, scraper, finger cot, etc.)

Warm notice: Keep children away from it. If swallowed or inadvertently come into eyes, ear, nose, mouth. Brush with clean water or send to hospital when necessary.

Storage: Normal temperature preservation. Please cover it after using, avoid impurities such as dust, which will have effect of thermal conductivity.

Smearing Steps

1. Please clean the surfaces of heat source (CPU) and dissipate heat device (heat sink) with dry tissues.

2. Using scraper or other tools to smear the thermal paste onto the CPU, and it’s no need to smear on heat sink.

3. The thermal paste should be smeared evenly on the whole CPU surface. It can neither too thin, the printed words on it should be covered. Nor too thick, the thickness like A4 paper will be better. Please refer to the following pictures.