Conductive Heatsink Plaster Viscous Adhesive Compound Glue For For Chip VGA RAM LED IC Cooler Radiator Cooling STARS-922

Specifications:

It has good conductivity and wide service temperature range.

The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free.

Can be applied safely in elastic adhesion, heat dissipation, insulation and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.

Suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

Type: Heatsink Plaster

Quantity: 2Pcs

Material: Silicone

Capacity: 5g(1Pc)

Shear Strength: 1.5MPa

Conductivity: >0.671W/m.k

Surface Curing Time: 10Min/25 ?

Operating Temperature Range: -60? - 200?

Features: Strong Adhesive, Non Toxic, Solvent Free, Cooling Plaster

Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures.

Operation Manual:

1.When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.

2.The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.

3.Recommended coating thickness: 0.1-0.5mm, the thinner the better.

4.Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.

Package Includes:

2 x Heatsink Plasters