ADT-Link M.2 Key A.E WiFi Interface Riser Extender Adapter Cable to PCI-E x8 Gen 3.0 8G/bps Cable for PCIe 3.0 8x SSD M2(R48SF)(40cm)

Product model: R58SF, R48SF(R58, R48 series)
Product Name: M. 2 key A. E WiFi interface to PCI-E X8 adapter extension cable-R58SF
M. 2 NVMe to PCI-E X8 adapter extension cable-R48SF
Wire length: 3-100cm (support line length customization, different line lengths have different prices, please contact customer service for line length customization. )
Speed bandwidth: PCIe 3.0 x1 gen3 8G/bps
Product features: PCIe 8x SSD memory card, using adapter extension cable, plugged into the motherboard's M. 2 WiFi slot interface
Friendly Tip: This product has many compatibility problems. If you assemble it incorrectly or improperly, it will burn your device. Professional engineers are authorized to purchase. This product is a product that is not refundable, please consider and confirm the order and then purchase.
The length of the wire instructions:
Our wire length refers to the visual wire part, does not include the PCB and connector.
The following models for R58SF - 5 cm, refer to the below dimension.
Product advantage:

1.
Wire advantages: using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 8G/bps stable transfer.
2.
Cable length: from 5 cm to 100 cm can be customized, our wire has a low impedance, the cable below 60cm can be stable at PCIe 3.0 full speed reading and writing.
3. Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability.
4. PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen.
Purchase Notice:

1. You must identify the direction when you plug in this cable. Dont reverse insert and bend, prevent burning equipment.

2. All kinds of Motherboard and equipment condition such as signal driving ability is different, the results of our test does not guarantee that it is the same as your test results. You need to know, as long as using a extension cable, the signal will have a loss. The buyer who requires perfectly, please don't buy.

3. The graphics card or motherboard is an electronic equipment which will increase over time and oxidative aging. It will become more unstable if plug in an extension cable. Does not support the old equipment. The device which is more than four years, please don't buy.

4. Only use for Engineering professionals product testing, If other purposes or don't have DIY ability, please don't buy.