Package Include:
1 x 1-Port PoE Extender
Applicable Range:
Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from the power outlets
Installed at hotels, schools, buildings, villages, etc.
Features:
Comply with IEEE 802. af Power over Ethernet
10/100M Supported
Extender the range of PoE an additional 120 meters
Automatically detects and protects PoE equipments from being damaged by incorrect installation
Plug-and Play no configuration required
1 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 UTP cable.
Product Review:
1-Port PoE Extender has 2 10/100M Lan ports, among them, one for power input, the other for power output. Comply with 10/100BASE-TX, IEEE 802.3 af-PoE.
Power input for single port is 13W. Power output for single port is 12.2W.
Specification:
PoE input: 1 RJ45 port
PoE output: 1 RJ45 port
Network Medium: Cat5 or better UTP cables (less than 120m)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 400Mbps
PoE Standard: IEEE 802.3 af
Input power: 13 Watts
Output power: 12.2 Watts
Power Supply Type: 1/2+, 3/6-, Mode A, End-Span
Network Protocol: IEEE 802.3 i-10BASE-T, IEEE
802.3 u: 100BASE-TX, IEEE 802.3 x-Flow Control, IEEE 802.3 af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2004/108/EC;
Working Temperature: 0°C~40°C
Working Humidity: 10%~90%, No Condensation
Storage Temperature: -30°C~70°C
Storage Humidity: 5%~90%, No Condensation;
Dimension: 75x37x 26.5 mm / 2.95 '' x 1.46 '' x 1.04 ''
Weight: 60g
Notes:
Please don't place any heavy thing on the PoE extender;
To prevent the water seeping into the extender, please keep PoE extender away wet environment;
Suggest to use PoE extender indoors. When installing the extender in outdoor, please install it in a waterproof place.