CHA6024RH-10B 6010 24V 0.25A 60x60x10MM 2-wire computer cooling fan

The CHA6024RH-10B is a 60 × 60 × 10 mm, 24 V, 0.25 A, 2-wire computer cooling fan for people replacing a fan or fitting a system that specifically requires those dimensions and electrical specifications.

Recommended For

• DIY 3D-printer owners replacing a PSU or mainboard fan, if the device calls for a 24V, 60 × 60 × 10 mm, two-wire fan and the connector and airflow needs also match.
• Repair hobbyists restoring cooling in compact electronics that already use this fan size, voltage, and two-wire connection, rather than changing the device’s cooling design.
• 3D-printer tinkerers who are comfortable comparing replacement fans and checking noise in their own setup; community reports show noise results can vary between 6010 replacements and stock fans.

Real-World Use Scenarios

• Replacing a failed fan in a NAS or other compact device: if the original fan is 60 × 60 × 10 mm, 24 V, and uses a compatible two-wire connection, this fan may restore airflow; verify the connector and mounting before installing.
• Repairing a 3D printer’s power-supply or electronics cooling: when the printer’s original fan matches the 24 V rating, size, and wiring, replacing it can return cooling airflow; it is not a fit for printers that require a different fan size or voltage.
• Restoring airflow in a compact network appliance or small PC enclosure: if its design calls for a 60 × 60 × 10 mm, 24 V fan, this slim replacement can fit a shallow mounting space; actual cooling depends on the device’s airflow path and fan requirements.
• Adding ventilation to a small electronics enclosure: where the enclosure is designed for a 24 V, 60 mm fan, it can provide forced airflow through a tight space; check the required airflow direction and confirm the fan’s electrical and mounting compatibility.

Spec Summary