ZVS Tesla Coil Power -Supply No Tap ZVS, Tesla Coil Power -Supply High Voltage Generator Driver Board

Model Number:-
is_customized:Yes
Electricity Type:-
Number of Pole:-
Phase:-
Main Circuit Rating Voltage:-
Main Circuit Rating Current:-

This driver board has the following features:
1. It adopts military grade 1.6MM double-sided fiberglass board production (general merchants use low-cost single panel)
2. Using factory-designed large inductors, the parameters are consistent and the performance is more stable (30MM large magnetic ring, using 1.2MM pure copper wire)
3. All resistors use five-ring tight resistors (five-ring precision resistors have small error and work more stable)
4. The current at the bottom of the circuit board is mostly tinned (can be used for induction heating. Generally, in order to save cost, the general business can only do the high voltage package drive without opening the window. Once used for induction heating, it will burn out because the copper is light. Overcurrent is not enough. 5. Generally, it is powered by 12-30V DC power supply. The current needs to be more than 10A. Because the driver board is working in Zero Voltage Switching, his efficiency is the highest. Others. The drive is incomparable, the higher the voltage, the longer the arc is drawn (I personally test the 27V/15A switching power supply can pull the arc above 80MM, basically no heat), can also be used for induction heating or quenching, this is also the voltage The higher the heating, the faster the heat is generated. It is recommended that the diameter of the heated solid object does not exceed 2/3 of the coil.