V0 V0.1 One Sided Textured Powder Coated PEI Spring Steel Build Plate 120x120mm For 3D Printer Parts

Origin:CN(Origin)
Item Type:Heatbed
Model Number:120-1
Type:heatbed
Application:3D printer heated bed
Size:120x120mm,custom

V0 V0.1 One Sided Textured Powder Coated PEI Spring Steel Build Plate 120x120mm  For 3D Printer Parts
How to apply PEI sheet on steel plate:
www.youtube.com/watch?v=68905devmu0&t=30s
Items Included:
one sided smooth:one sided smooth pei ,other sided blank.
one sided textured:one sided textured,other sided is blank.
the magnetic base can stand the high temp at 140C without losing magnetism, suitable for almost all filaments.  PLA, ABS, PC, etc
Advtanges:
Never warp& Never rust.
Easy to get the first layer even for a user
Flexible, Removable, stick to magnets very well
Suits variety of filaments, especially for PLA
clean- just flex the plate a little then take the prints off after cooled
Fast heater performance, less waiting time after printing.
A lifetime 3D printer bed
Material:
100% real Ultem1000( PEI)amber color, matte surface. - Made in Europe
This spring steel sheet is flat, flexible, stainless stick to magnets very well
PEI is 3m tape pre-applied, bubbles.
Important Information:
1.Recommend print temps
PLA – 60C
HTPLA – 60C
PETG – 70-80C
PCTG – 70-80C
ABS – 100C
2.Product Usage Guidelines
PETG/PCTG/TPU
– If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI
Part Removal
– Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface
How to use?
After apply the PEI sheet on our special spring stainless steel sheet, You can simply use 4 clips or magnets to hold it on the heatbed, then enjoy the printing.
Easily remove 3D prints on printer by removing the spring steel plate, flexing it, and popping the print off. It's simple and makes the print removal process much easier.
For details, Check the guide video on Youtube