Power Adapter Charger DC 48V 60W EU US AU Standard Plug Power Supply 1.25A AC 110V to 240V

Certification:CE,FCC
Origin:Mainland China
Plug Type:UK,EU,AU,US
Model Number:ZQPOE48V 60W
Item Type:Cables
Place of origin:GuangDong, China
Certification::CE UL ROHS
Output Voltage:DC 48V
Output Frequency:50/60HZ
ChianOutput Current:1-3A
Output Power:51-100W
Products Status:Stock
Input Voltage:AC100-240V
Warranty:12monhs

PoE Injector Power Supply 48V 60W AC DC Power Adapter
Specification:                                                                        
Input voltage range: AC 110V ~ 264V 47-63Hz
Rated output rating: Load regulation: 48Volt±5% DC 12.5Amp 60W Max.
tput no-load voltage: 105% output voltage Max(Nom.)
Inrush current (Cold): 80A Max.
Protection: OCP/ OVP/ SCP
Dielectric strength: Input Output 3.0 KV for 1 minute
Insulation resistance: 500VDC 50M Minimum
Efficiency: 70% Normally @ rated load
Ripple & Noise: 1% output voltage Max.
Line regulation: ±1%
Hold up time: 3ms
Temperature rise: 95 °C Max. @ rated load / Class B
Applicable standard: UL60950, IEC-60950/ EN60950
Safety Agency approved: UL/CUL/CE/GS/C-tick/FCC
Normal operating environment: 0°C ~ 40°C
20% ~ 80% R.H
Storage environment: -20°C ~ 70°C
20% ~ 90% R.H
Picture Show:                                                                                                  
LOW COST SOLUTION FOR PoE:                                                                    
We have POE patch panel& injector which can power  device with 48V power supply.
(such as IP camera, IP phone, WiFi access point AP, iPad and Tablet etc.)
1. Solution for POE device:
poe injector + 48V power supply(Midspan) and non-poe switch it is same as most of your POE switch (Endspan)
2.  Solution for Non-PoE device
PoE injector +48V power supply+ 5v2a or 12v1a poe splitter for these device which don't Support POE(802.3af/at).