Vszerda M.2 Adapter M.2 NVME SSD Convert Adapter NVMe PCIe M2 NGFF to SSD for Laptop for Air Pro 2013 2014 2015 A1465 A1466 A1502 A1398 PCI-E x4 (10PCS)

Features:

To install NVME M.2 SSD, you need to pay attention to the following: First, you must upgrade the mac os to the new version of high sierra 10.13. The upgrade will automatically update the smc and boot rom versions of the mac to support the ssd of nvme. Secondly, you must not use the Mac's own network recovery software to install a new hard disk mac os, but to install through the u disk, (to make a 10.13.6 U disk Apple tool in advance), in order to identify the new hard disk. In addition to installation Be sure to format the disk to APFS format. If it is formatted as HFS, it will restart in the installation system interface, and then prompt the disk space is insufficient.

This riser card + hard drive can replace the original hard drive of the following models:

2013 version MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294),

2014 version MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2),

2015 version MacBook Pro retina A1502 A1398 (MF839 MF840 MF841 MJLQ2 MJLT2),

2013-2014 version MacBook Air A1465 A1466 (MD711 MD712 MD760 MD761),

2015 version MacBook Air A1465 A1466 (MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878, iMAC A1419 (Late 2013 and newer).

Note:

Apple's 10.13 and later systems already support the M.2 NGFF SSD for the NVMe protocol.

The working principle of the adapter card is extremely simple. Just connect a few wires from your original hard disk and reconnect to the hard disk interface of the Apple notebook. There is no need for chip conversion in the middle, so there is no need to drive and it will not change any performance of your hard disk !

Package list:

10pcs x adapter card

Additional Features

• To install NVME M.2 SSD, you need to upgrade the mac os to the new version of high sierra 10.13. The upgrade will automatically update the smc and boot rom versions of the mac to support the ssd of nvme.