250W DC-DC Step-Up Power Supply Module 8.5V-48V To 10-50V Power Converter Module Constant Voltage Constant Current

250W DC-DC Step-Up Power Supply Module 8.5V -48V to 10-50V Power Converter Module Constant Voltage Constant Current Aluminum Substrate
Specification:
Module nature: Non isolated boost module (BOOST)
Input voltage: DC 8.5V -48V
Input current: 10A (MAX), if it exceeds 8A, please strengthen heat dissipation
Static working current: 10MA (when 12V rises to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 10-50V continuously adjustable
Output current: 10A MAX, if it exceeds 6A, please strengthen heat dissipation (related to input and output pressure differences, the larger the pressure difference, the smaller the output current)
Constant current range: 0.2 -8A
Output power: =input voltage * 10A, such
as: input 12V *=60W, input 24V *=120W, input 36V *=180W, input 48V *=240W. If higher power is required, two modules can be used in parallel,
For example, if the output needs to be 10A, two modules can be connected in parallel and the current of each module can be adjusted to
Working temperature: -40-+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
Working frequency: 150KHZ
Conversion efficiency: 96% higher (efficiency is related to input and output voltage, current, and voltage difference)
Overcurrent protection: Yes
Input reverse protection: Yes, (if less than the required reverse current, please connect two transistors in series at the input)
Installation method: 4 3MM screw holes
Wiring method: wiring output
Module size: 70 * 36 * 13mm/ 2.75 * 1.41 * 0.51 inch
Module unit weight: 64g
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Power Supply Module