Displayport USB 3.0 KVM Switch 3 Monitors 2 Computers, DP1.4 Triple Monitor KVM Switch with Audio Microphone Output and 3 USB 3.0 Ports, 8K@60Hz DP KVM Triple Monitor Keyboard Mouse Switcher

8K@60HZ DisplayPort USB 3.0 Triple Monitor KVM Switch for 2 Computer Sharing 3 Monitor and 3 USB 3.0 Ports, Audio & Microphone

Advantages:

1, Share one set of keyboard, mouse and 3 monitors (3 DisplayPort) between 2 computers or laptops;

2, Supoort DP 1.4 and downward compatible. 3 monitors output support up to 8K@60Hz for extended, mirrored or spliced display(Depends on your computer's graphics card. );

3, No complicated installation is required, and non-professionals can easily operate it, Ideal for multi-tasking professionals and gamers who need to access multiple devices quickly and efficiently;

4, Cross support major operation systems including Windows, Linux, Mac and more;

5,

Switching modes: Buttons on the front panel and wired remote;

6, The ports that need to plug in DP/USB cables are all hidden behind the KVM, so the desktop doesn't get cluttered;

7, A USB hub can expand the USB 3.0 ports if multiple connections are required, also an audio microphone output.

installation steps:

1. Insert the DC/5V adapter into the KVM;

2. Plug the 3 DP cable into the KVM and monitor; (3 DP Output)

3. Plug the 3 DP cable and USB cable into the KVM and your computer/laptop (DP cables are not included) (Input)

DP IN 1A + DP IN 1B + DP IN 1C + USB IN 1=PC1

DP IN 2A + DP IN 2B + DP IN 2C + USB IN 2=PC2

Please check whether DP IN 1A, DP IN 1B, DP IN 1C, and USB IN 1 corresponding, and whether DP IN 2A, DP IN 2B, DP IN 2C and USB IN 2 are corresponding. Mixed insertion is not supported.

4. Insert the mouse and keyboard into the KVM switch

5. If needed, you can connect a microphone and audio port

Note:

1. Most of the reasons why only one video output works is because of incorrect connection. Please make sure each PC has(3 DP cables+1 USB cable) connect to the KVM.

2. If the KVM switch does not work, you can turn off the switch on the panel and turn it on again after 2-3 seconds, and it will return to normal.

3. If the input USB 3.0 ports are not connected or connected incorrectly, the output USB device will not be recognized.

4.

Note: DP cables are not included