SATA Card, PCIE 3.0, 4 Port with 4 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices

Installation Notes

1. If it is not recognized, please replace a PCIe slot, or try updating the motherboard BIOS.
2. If it is not recognized, please try to install the driver.
3. Compatibility issues may occur due to the different motherboard environments in which it is installed.
4. It is forbidden to install in the PCI slot.

[Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s

[High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported

[Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE

[For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot

[Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card