Your Browsing History
Meet Your Seller
POE Over Coax Converter BNC to Ethernet IP Extender EOC, 3280ft(1000m) Power & Data Transmission Over RG59 Coaxial Cable for Analog to IP CCTV Security Surveillance System Upgrade 2 in1 BNC+Twist Pair
Limited time offer, ends 10/26 By Anunirny
- [POE Dual-Standard & DC+LAN Interface Instructions] The EoC Receiver features a DC48V/12V Plug (no extra power needed if using POE) + Lan (IN) Port to connect to a Standard POE Switch or Standard POE injector; the EoC Transmitter features a DC12V Plug (no extra power needed if using POE) + Lan (OUT) Port that connects to POE Power-Using Equipment or non-POE devices (IP cameras, VoIP phones, WiFi APs). [Built-in BNC & Twisted Pair Dual Functions] Integrated Dual-Medium POE Transmission requires no extra BNC-to-twist-pair adapters, for stable, high-efficiency use. It enables POE power + data transmission over coaxial (BNC-F interface) and twisted pair, ideal for elevator cart CCTV systems or industrial sitessolves POE device connectivity where rewiring is impractical. [Analog to IP Upgrade Widely Used] Reuse existing RG59/RG6/RG11 coaxial cables to upgrade analog surveillance systems to IP networks, eliminating the cost and hassle of rewiring. The Lan RJ-45 port supports 568A/568B wiring standards and is compatible with IEEE802.3af (PoE) & 802.3at (PoE+) protocols. Ideal for multiple scenarios including security video systems, home automation, access control, multimedia systems, education systems and information diffusion systems. Each set. [Plug-and-Play] Industrial-Grade Reliability POE Setup features industrial-grade reliability with a built-in heat sink, ensuring uninterrupted POE transmission even during long-term use. With a compact and lightweight design (4.33"x2.17"x
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
[POE Dual-Standard & DC+LAN Interface Instructions] The EoC Receiver features a DC48V/12V Plug (no extra power needed if using POE) + Lan (IN) Port to connect to a Standard POE Switch or Standard POE injector; the EoC Transmitter features a DC12V Plug (no extra power needed if using POE) + Lan (OUT) Port that connects to POE Power-Using Equipment or non-POE devices (IP cameras, VoIP phones, WiFi APs). [Built-in BNC & Twisted Pair Dual Functions] Integrated Dual-Medium POE Transmission requires no extra BNC-to-twist-pair adapters, for stable, high-efficiency use. It enables POE power + data transmission over coaxial (BNC-F interface) and twisted pair, ideal for elevator cart CCTV systems or industrial sitessolves POE device connectivity where rewiring is impractical.
[Analog to IP Upgrade Widely Used] Reuse existing RG59/RG6/RG11 coaxial cables to upgrade analog surveillance systems to IP networks, eliminating the cost and hassle of rewiring. The Lan RJ-45 port supports 568A/568B wiring standards and is compatible with IEEE 802.3 af (PoE) & 802.3 at (PoE+) protocols. Ideal for multiple scenarios including security video systems, home automation, access control, multimedia systems, education systems and information diffusion systems. Each set. [Plug-and-Play] Industrial-Grade Reliability POE Setup features industrial-grade reliability with a built-in heat sink, ensuring uninterrupted POE transmission even during long-term use.
With a compact and lightweight design ( 4.33" x 2.17" x 0.98" ), it's easy to install and place. No complicated configuration requiredsimply connect the receiver to a POE switch via the Lan (IN) port, and the transmitter to POE cameras via the Lan (OUT) port. (Pre-paired for indoor use only; do not mix with other devices. ) [Long-Distance Stable POE & Signal Delivery Over coax]
Supports stable long-distance transmission: 100Mbps (300m/1000ft) / 30Mbps (2000m/6560ft) over coaxial cable, and 75Mbps (300m) / 25Mbps (2000m) over twisted pair. Compatible with CCA/CCU cables, it synchronously transmits video, audio, data, control signals and POE power to meet remote monitoring needs.
(Note: The speed rate refers to a single pair; more connected devices will result in lower speed. )
[Analog to IP Upgrade Widely Used] Reuse existing RG59/RG6/RG11 coaxial cables to upgrade analog surveillance systems to IP networks, eliminating the cost and hassle of rewiring. The Lan RJ-45 port supports 568A/568B wiring standards and is compatible with IEEE 802.3 af (PoE) & 802.3 at (PoE+) protocols. Ideal for multiple scenarios including security video systems, home automation, access control, multimedia systems, education systems and information diffusion systems. Each set. [Plug-and-Play] Industrial-Grade Reliability POE Setup features industrial-grade reliability with a built-in heat sink, ensuring uninterrupted POE transmission even during long-term use.
With a compact and lightweight design ( 4.33" x 2.17" x 0.98" ), it's easy to install and place. No complicated configuration requiredsimply connect the receiver to a POE switch via the Lan (IN) port, and the transmitter to POE cameras via the Lan (OUT) port. (Pre-paired for indoor use only; do not mix with other devices. ) [Long-Distance Stable POE & Signal Delivery Over coax]
Supports stable long-distance transmission: 100Mbps (300m/1000ft) / 30Mbps (2000m/6560ft) over coaxial cable, and 75Mbps (300m) / 25Mbps (2000m) over twisted pair. Compatible with CCA/CCU cables, it synchronously transmits video, audio, data, control signals and POE power to meet remote monitoring needs.
(Note: The speed rate refers to a single pair; more connected devices will result in lower speed. )
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Anunirny Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















