PCIe 4.0 x16 Riser Cable 200mm Vertical GPU Mount RTX 4090/4080 White, Near-Zero Signal Loss, 64GB/s, Triple EMI Shield, 6-Layer PCB, 5U gold, RTX 4090/4080/4070, RX 7900 XTX/7800 XT

[FULL PCIe 4.0 x16 BANDWIDTH, NEAR-ZERO SIGNAL LOSS] Unlock full 64GB/s bidirectional (32GB/s per direction 2x the bandwidth of PCIe 3.0 ) on a CPU-direct PCIe 4.0 x16 slot. Controlled-impedance traces and tuned shielding keep the signal eye clean under sustained 4K gaming and rendering no speed drops, no stuttering. [VERTICAL GPU MOUNT, SHOWCASE YOUR BUILD] Mount the graphics card vertically to display it in full and improve airflow around the GPU; a clean vertical setup frees up space and makes a high-end card the centerpiece of any SFF or showcase build. [ULTRA-FLEXIBLE FLAT CABLE, BENDS 90°/180° WITHOUT KINKING] The soft 30AWG flat cable routes cleanly around tight case corners and bends 90° or 180° without kinking.

It frees the motherboard slot from lateral stress, lowering bent-slot and poor-contact risk. [TRIPLE EMI SHIELDING & 6-LAYER GOLD-PLATED PCB] Triple protection an independent metal shield, foil-wrapped signal pairs, and tinned copper braiding blocks EMI from CPU coolers, PSUs, and RGB controllers. The thickened 6-layer PCB resists bending fatigue, while 5U gold-plated contacts lower resistance and resist oxidation for lasting, reliable connections. [BROAD GPU COMPATIBILITY & EASY SETUP] Works with RTX 4090, 4080, 4070, as well as RX 7900 XT, 7800 XT, 6900 XT; backward compatible with PCIe 3.0 for ITX, SFF, mid-tower, and open test-bench builds.

Measure slot-to-GPU distance first and leave extra length for bends. Always power off and unplug before installing (no hot-swap), then seat both connectors until latched. If the GPU is not detected or the system won't boot, check connections and your BIOS/UEFI PCIe settings