Your Browsing History
- Free 30-day Returns
$23.99
Meet Your Seller
12V-36V DC Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Cut Off Over Discharge Protection Module Pack of 4
Limited time offer, ends 11/25 By MiniJoyBelle Tech
- OVER-DISCHARGE PROTECTION: This battery controller provides flexible discharge modes and adjustable settings. Set a voltage threshold to automatically disconnect the battery at that voltage, preventing over-discharge and helping the battery last longer. The relay has no power cut-off switch. Cut off power to the module after the relay disconnects the battery; otherwise, the module will continue to draw power from the battery until its voltage drops to 0 V. SIMPLE OPERATION: To restore factory settings, turn off the device, press and hold both buttons, and turn it back on while holding them. The display will show "888" to confirm the reset. The default protection threshold is 12V, with a 2V difference between the disconnect and reconnect voltages. The device retains user settings during an unexpected power loss. SCOPE OF APPLICATION: This voltage controller employs a relay to switch the output on and off. The relay functions solely as a switch and does not alter the voltage. Compatible batteries include lead-acid, lithium-ion, and solar panel batteries. This protective switching module does not include batteries and is not suitable for battery packs. PARAMETERS: Board Size: 57 x 42 x 19 mm (2.24 x 1.65 x 0.75 inches) LxWxH; Input Voltage: DC 12-36V; Accuracy: ±0.1V; Power Consumption: <1.5W; Maximum Current before Breaker Trips: 20A. NOTE: The compact circuit board uses a small relay and thin circuit traces. To avoid damaging the relay contacts, keep the operating current at
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
OVER-DISCHARGE PROTECTION: This battery controller provides flexible discharge modes and adjustable settings. Set a voltage threshold to automatically disconnect the battery at that voltage, preventing over-discharge and helping the battery last longer. The relay has no power cut-off switch. Cut off power to the module after the relay disconnects the battery; otherwise, the module will continue to draw power from the battery until its voltage drops to 0 V.
SIMPLE OPERATION: To restore factory settings, turn off the device, press and hold both buttons, and turn it back on while holding them. The display will show "888" to confirm the reset. The default protection threshold is 12V, with a 2V difference between the disconnect and reconnect voltages. The device retains user settings during an unexpected power loss.
SCOPE OF APPLICATION: This voltage controller employs a relay to switch the output on and off. The relay functions solely as a switch and does not alter the voltage. Compatible batteries include lead-acid, lithium-ion, and solar panel batteries. This protective switching module does not include batteries and is not suitable for battery packs.
PARAMETERS: Board
Size: 57 x 42 x 19 mm ( 2.24 x 1.65 x 0.75 inches) LxWxH;
Input Voltage: DC 12-36V;
Accuracy: ± 0.1V;
Power Consumption: < 1.5W; Maximum Current before
Breaker Trips: 20A.
NOTE: The compact circuit board uses a small relay and thin circuit traces. To avoid damaging the relay contacts, keep the operating current at or below 8A. The specified maximum is 10A below 12V, and the current must stay below 8A above 12V
SIMPLE OPERATION: To restore factory settings, turn off the device, press and hold both buttons, and turn it back on while holding them. The display will show "888" to confirm the reset. The default protection threshold is 12V, with a 2V difference between the disconnect and reconnect voltages. The device retains user settings during an unexpected power loss.
SCOPE OF APPLICATION: This voltage controller employs a relay to switch the output on and off. The relay functions solely as a switch and does not alter the voltage. Compatible batteries include lead-acid, lithium-ion, and solar panel batteries. This protective switching module does not include batteries and is not suitable for battery packs.
PARAMETERS: Board
Size: 57 x 42 x 19 mm ( 2.24 x 1.65 x 0.75 inches) LxWxH;
Input Voltage: DC 12-36V;
Accuracy: ± 0.1V;
Power Consumption: < 1.5W; Maximum Current before
Breaker Trips: 20A.
NOTE: The compact circuit board uses a small relay and thin circuit traces. To avoid damaging the relay contacts, keep the operating current at or below 8A. The specified maximum is 10A below 12V, and the current must stay below 8A above 12V
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by MiniJoyBelle Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...















