Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
240W DC-DC Boost Converter 12V to 24V 10A Step Up Voltage Regulator - Waterproof Power Supply Module for Car Audio, Solar Panel,CCTV - Over-Current/Short-Circuit Protection
Limited time offer, ends 07/26 By EmpressTech
- Accurate output 24V±0.5V, maximum 10A current/300W power, industrial grade efficiency up to 95%, 20% more energy output than ordinary converters!; Built-in over-current/over-voltage/short-circuit/overheating protection, FCC & CE certified, tested 100+ hours without failure, equipment safety!; Aluminum alloy shell + silicone sealing, IP65 waterproof (rain/car washable), shock-resistant design perfectly suited for off-road vehicles, boats, outdoor solar energy!; Supports 12V input (compatible with 10-16V), connects to trucks/RVs/solar panels/LED light strips/monitoring devices in seconds, no debugging required!; 30 days no reason to return or exchange, customer service 7×24 hours response!
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Product description 12V DC Step-Up Specification Input Voltage 12V Output voltage 24V Output current 10A Output power 240W Watertightness IP68 No-load adjustment rate 2% Load regulation 3% Ripple wave 300mVP-P DC Voltage Regulator Safety Manual 1. The load connected to the output of the power regulator should not be higher than the maximum load power, any higher load will cause damage to the power regulator. 2. If the ambient temperature is too high, the power should be reduced accordingly, and the stability of the power supply should be higher when operating at low temperatures.
3. Do not use the device near a heat source such as fire or heater. 4. Do not connect the input cable to the 220 V household mains. 5. Do not place the appliance near a fire or heater. 6. Do not allow non-professionals to disassemble and service the appliance. 7. The input voltage should not exceed the fluctuation range that the converter can withstand. 8. The output power of the converter must be greater than the power required by the connected devices. 9. The positive and negative leads must not be reversed.
3. Do not use the device near a heat source such as fire or heater. 4. Do not connect the input cable to the 220 V household mains. 5. Do not place the appliance near a fire or heater. 6. Do not allow non-professionals to disassemble and service the appliance. 7. The input voltage should not exceed the fluctuation range that the converter can withstand. 8. The output power of the converter must be greater than the power required by the connected devices. 9. The positive and negative leads must not be reversed.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...