USB3.0 USB-C to Dual M.2 NVME M-Key M.2/2.5 3.5 Inch SATA/40Pin IDE SSD External PCBA Case Enclosure

1) This device can only work with one drive at a time, If both M. 2 and SATA/IDE interfaces are plugged into the disk drive at same time, Only SATA interface driver can be worked. (All the disk don't support hot plugging, Please don't chagne the SSD when connecting on computer. ) 2) This USB 3.0 to M. 2 SSD Enclosure work for NVMe PCIE M-Key / B+M connectors M. 2 SSD. Applicable to sizes 2242 / 2260 / 2280 solid state drivers; Not support M. 2 PCIe AHCI SSDs, M.

2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M. 2 form factor SSDs. (10Gbps for M. 2 NVMe SSD and 5Gbps for M. 2 SATA SSD) 3) This USB 3.0 to SATA SSD Enclosure work for 2.5 inch Laptop SATA HDD SSD; Also work for 3.5 inch Desktop SATA HDD SSD with 12V DC Power (The Power supply not include),;
Note: SSD and HDD are not included. This USB 3.0 to IDE/PATA SSD Enclosure work for 3.5 inch Desktop SATA HDD SSD with 12V DC Power (The Power supply not include);
Note: SSD and HDD are not included. 4) Attached Type-C & Type-A Cable, Type-C Cable Both side can be inserted; M. 2 NVME recommends USB-C Gen 2 10Gbps or USB4/TB3/TB4 for extreme speed performance. Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps. 5) Compatible Multi OS, Windows 7/ 8/ 8.1 / 10/ 11/ Linux/ MAC. Plug-and-play, no additional drivers required. Bus powered, does not need an external power supply.
Specification: One IDE-4Pin Power-Out, One DC-IN (DC12V 5.5 x 2.1 mm plug) port, One power switch and one USB-C port. Four Status LEDs indicates the Disk and Power, Powered by a DC 12V/2A power adapter (not included).