Your Browsing History
- Free 30-day Returns
$43.39
Ships from China.
Meet Your Seller
65W PD Mini Soldering Hot Plate, USB Type-C Temperature Controlled Preheater with LED Display, Reflow Soldering Heating Plate for PCB Repair and Electronics DIY
- This heating table requires power supply from a PD protocol 20v 3.25A fast charger. We do not accept returns or refunds based on the buyer's claim that they do not have such a charger.
- 2. When using the PD protocol with a 20v3.25A power supply, the maximum temperature can reach around 240 degrees. The heating platform can be set from 0 to 350 degrees. If the buyer uses the PD protocol power supply but sets it above 240 degrees, resulting in failure to reach the set temperature, we do not support returning or refunding the product on this basis.
- 3. The PD protocol can only be used when the charger and data cable both support it. Neither can be missing. Some inferior data cables only have two wire cores and do not support PD protocol chargers. We do not support returning or refunding the product on the grounds of such issues.
- 3. The PD protocol can only be used when both the charger and the data cable are compatible. They must be used together. Some inferior data cables have only two wire cores and are not compatible with PD protocol chargers.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The outer shell is made with high-quality hand-made 3D printing technology, without layer lines. It is not comparable to FMD, PLA, etc. The probe uses high-precision PT100, which can precisely control the temperature, with an accuracy of 0.6%. No inferior NTC is used. The accuracy of the NTC probe is 1% at 25 and will reach an alarming 8% at 300. It uses brand-new components and SMT assembly technology to ensure quality. Below this price, most of the components are dismantled and the quality is questionable!
Detailed parameters:
Interface: Type-C Power supply: PD 65W 20V 3.25A
Shell: High-quality 3D printed shell, without layer lines
Product dimensions: Length 5.6 cm, Width 5.6 cm, Height 3.5 cm
Product Introduction: Aluminum-based heating plate, PCB heat insulation board, light-curing 3D printing shell. It reaches 200 within just over one minute.
Operation Instructions: Left button for cooling, right button for heating. Press both buttons briefly to start heating, press both buttons simultaneously for entering settings.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by CoreDepot Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...