Your Browsing History
- Free 30-day Returns
$42.99
Ships from China.
Meet Your Seller
PD Protocol 65W Mini Constant Temperature Heating Stage Preheater LED Display Reflow Soldering Station Welding Heating Plate
- Introduction:
- The outer shell is made using high-quality hand-made 3D printed technology, without layer lines. It is not comparable to FMD, PLA, etc. The probe uses high-precision PT100, with precise temperature control, with an accuracy of 0.6%. No inferior NTC is used. The accuracy of the NTC probe is 1% at 25 and will reach an alarming 8% at 300. New components and SMT assembly technology are used to ensure quality.
- Detailed parameters:
- Interface: Type-C
- Power supply: PD 65W 20V 3.25A
- Shell: High-quality 3D printed shell, without layer lines
- Product dimensions: Length 5.6cm, Width 5.6cm, Height 3.5cm
- Product description: Aluminum base heating plate, PCB heat insulation board, light curing 3D printed shell, temperature rises to 200 in less than 1.5 minutes
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Operation Instructions:
Left button for cooling, right button for heating. Press both buttons briefly to start heating, press both buttons simultaneously for entering settings.
Note:
1. This heating table requires power supply from a PD protocol 20v 3.25A fast charger. It does not support the return or refund of the buyer if they do not have such a charger.
2. When powered by the PD protocol 20v 3.25A, the maximum temperature can reach around 240. The heating table can be set from 0 to 350. If the buyer uses the PD protocol for power supply but sets a temperature higher than 240, resulting in not reaching the set temperature, it is not supported to return or refund on this basis.
3. The PD protocol can only be used when both the charger and the data cable support it simultaneously. Neither can be missing. Some inferior data cables only have two wire cores and do not support PD protocol chargers. It is not supported to return or refund on the basis of such issues.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by CoreDepot Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...