XDS110 JTAG Debug Probe, TMDSEMU110-U Compatible Debugger & Programmer for ARM Cortex-M / MSP430 / C2000, CCS Support

Supported Devices:

1. SimpleLink MCU (CC13xx, CC26xx, CC3x, MSP432)
2. C2000, TM4C12x and Hercules microcontrollers
3. Sitara (AM335x, AM43xx, AM57xx, AM65xx, AM1C1xx)
4. Automotive SoC (TDAx ADAS, DRAx infotainment systems)
5. Millimeter wave sensors (IWR/ AWR14xx, IWR/AWR16xx, IWR68xx)
6. C674x and C66x (Keystone I) floating-point DSP
7. C642x and C645x
8. 66AK2 and TCI66x multicore DSP + ARM® SoC (Keystone II)
9. C55x low-power DSP
10. UCD3x digital power supplies
11. PGA970 SoC
12. Other TI SoCs with PRU, C674x, C66xx, Cortex M, Cortex R and Cortex A cores

Unsupported Devices:

1. MSP430 microcontroller
2. ARM9-based processors using adaptive clocking, such as OMAPL13x, AM1xxx, DM64xx
3. AWR12xx millimeter wave sensors
4. C54x
5. C62x, C670x, C671x, C672x, C640x and C641x

Features

1. Serial Wire Debug (SWD) and Serial Wire Output (SWO) are available for selected microcontrollers and wireless connectivity microcontrollers for core and system tracing via Embedded Trace Buffer (ETB) from selected ARM and DSP processors.
2. For more information regarding specific device tracking features, please refer to its Technical Reference Manual (TRM).

You will need:

1. Code Composer Studio v7 (or higher) or installation of a compatible 3rd-party development environment.
2. A target board with one of the compatible JTAG headers.

You may need:

1. Adapters allowing connection to target boards with different JTAG headers.

Features

The XDS110 is the latest entry-level debug probe (emulator) for TI embedded processors. The XDS110 aims to be a complete solution, providing JTAG and SWD connections at low cost, making it the first-choice debug probe for entry-level debugging of TI microcontrollers, processors, and SimpleLink devices.

The XDS110 replaces XDS100 technology and is the first debug probe to support all TI devices with JTAG, cJTAG, and SWD/SWO debug ports in a single product. Additionally, all ARM and DSP devices supporting Embedded Trace Buffer (ETB) can use core processor and system tracing.

The XDS110 is also the first in the XDS series of debug probes to feature EnergyTrace for MSP432 and its add-on module for SimpleLink wireless connectivity devices, the XDS110 EnergyTrace HDR. EnergyTrace is a method that allows measurement of the target board's true energy and power consumption. It can measure up to 75mA of source current and 800mA of added load. As an added option, the same physical connection for EnergyTrace also includes a UART port and four GPIOs for complete hardware control.

The XDS110 is aimed at replacing the older XDS100 series JTAG debuggers with higher JTAG and cJTAG data throughput at the same cost, while adding support for ARM Serial Wire Debug mode.

Following the trend of shrinking space on modern TI development boards, the XDS110 uses the standard TI 20-pin connector as the primary JTAG connection with the target. In addition to this, all enclosures feature modular target configuration adapters for TI and ARM standard JTAG headers (adapter part numbers vary by supply type).

The XDS110 series supports traditional IEEE1149.1 (JTAG) as well as IEEE1149.7 (cJTAG) and ARM Serial Wire Debug (SWD) / Serial Wire Output (SWO), operating at interface voltages from +1.8V to +3.6V.

IEEE1149.7 or Compact JTAG (cJTAG) is a major improvement over traditional JTAG because it only uses two pins to support all its functions and can be used on selected TI wireless microcontrollers.

Serial Wire Debug (SWD) is a debug mode that uses two pins (JTAG uses four) and transfers data at a higher clock rate compared to JTAG. Serial Wire Output (SWO) adds one pin, allowing simple trace operations to be executed on selected Cortex M4 microcontrollers.

The XDS110 supports USB 2.0 Full Speed (11Mbps) or High Speed (480Mbps) connection to the host.

The XDS110 series is fully compatible with TI's Code Composer Studio IDE. This combination provides a complete hardware development environment, including an integrated development environment, compiler, and complete hardware debug and trace functionality on selected TI microcontrollers, processors, and wireless connectivity microcontrollers.

Other XDS Products:

1. XDS110 EnergyTrace HDR
2. XDS200
3. XDS560v2 System Trace with USB
4. XDS560v2 System Trace with USB and Ethernet
5. XDS560v2 PRO TRACE Receiver

XDS110 Debug Pod

20-pin Debug Cable

14-pin Auxiliary Cable

TI 20-pin to TI 14-pin Converter Adapter

TI 20-pin to ARM Cortex 20-pin Converter Adapter

TI 20-pin to ARM Cortex 10-pin Converter Adapter

USB2.0 Data Cable

English Quick Start Guide

Korean Quick Start Guide

Terms and Conditions Sheet