TMDSEMU110-U XDS110 JTAG Debug Probe Bottom Board, Texas Instruments MCU Programmer and In-Circuit Debugger

1. SimpleLink MCU (CC13xx, CC26xx, CC3x, MSP432)
2. C2000, TM4C12x and Hercules microcontrollers
3. Sitara (AM335x, AM43xx, AM57xx, AM65xx, AMIC1xx)
4. Automotive SoC (TDAx ADAS, DRAx infotainment systems)
5. mmWave sensors (IWR/AWR14xx, IWR/AWR16xx, IWR68xx)
6. C674x and C66x (Keystone I) floating-point DSP
7. C642x and C645x
8. 66AK2 and TCI66x multicore DSP + ARM® SoC (Keystone II)
9. C55x low-power DSP
10. UCD3x digital power devices
11. PGA970 SoC
12. Other TI SoCs with PRU, C674x, C66xx, Cortex M, Cortex R and Cortex A cores

Unsupported devices:

1. MSP430 microcontrollers
2. ARM9-based processors using adaptive clocking, such as OMAPL13x, AM1xxx, DM64xx
3. AWR12xx mmWave sensors
4. C54x
5. C62x, C670x, C671x, C672x, C640x and C641x

Features

1. Serial Wire Debug (SWD) and Serial Wire Output (SWO) available on select microcontrollers and wireless microcontrollers
2. Core and system trace available via ETB in select ARM and DSP processors
3. For more information on trace capabilities for a specific device, please refer to its Technical Reference Manual (TRM)

You will need:

1. Installation of Code Composer Studio v7 (or later) or a compatible 3rd party development environment.
2. A target board with one of the compatible JTAG connectors.

You may need:

1. An adapter to connect to target boards with different JTAG connectors

Shipping Information:

1. Product Box Dimensions: 260mm x 200mm x 50mm (10.0in x 8.0in x 2.0in)
2. Packaged Product Weight: 240g (8.0oz)

XDS110 is the latest entry-level debug probe (emulator) for TI embedded processors. XDS110 aims to be a complete solution, providing JTAG and SWD connectivity at low cost, and is the preferred entry-level debug probe for TI microcontrollers, processors, and SimpleLink devices.

XDS110 replaces XDS100 technology and is the first debug probe to support all TI devices with JTAG, cJTAG, and SWD/SWO debug ports in a single product. Additionally, all ARM and DSP devices that support the Embedded Trace Buffer (ETB) can use core processor and system tracing.

XDS110 is also the first in the XDS series of debug probes to feature an add-on module for MSP432's EnergyTrace and its SimpleLink wireless connectivity devices, the XDS110 EnergyTrace HDR. EnergyTrace is a technology that allows measuring the target board's real energy and power consumption; it can measure native current up to 75mA and up to 800mA with the add-on module. For added flexibility, the same physical connection of EnergyTrace also features a UART port and four GPIOs for comprehensive hardware control.

XDS110 aims to replace aging XDS100 series JTAG debuggers with higher JTAG and cJTAG data throughput, adding support for ARM Serial Wire Debug mode at the same cost.

With the trend of shrinking modern TI development board space, XDS110 uses a standard TI 20-pin connector as the main JTAG connection to the target. In addition, all variants feature a modular target configuration adapter for TI and ARM standard JTAG headers (adapter availability varies by model).

The XDS110 series supports traditional IEEE1149.1 (JTAG) as well as IEEE1149.7 (cJTAG) and ARM Serial Wire Debug (SWD) / Serial Wire Output (SWO), and operates with interface voltage levels from +1.8V to +3.6V.

IEEE1149.7 or Compact JTAG (cJTAG) is a significant improvement over traditional JTAG, as it supports all its functions using only two pins and is available on selected TI wireless connectivity microcontrollers.

Serial Wire Debug (SWD) is a debug mode that uses two pins (JTAG uses four) and transfers data at higher clock rates compared to JTAG. Serial Wire Output (SWO) adds a pin, allowing simple trace operations to be performed on selected Cortex M4 microcontrollers.

XDS110 supports USB 2.0 Full Speed (11Mbps) or High Speed (480Mbps) connection to the host.

The XDS110 series is fully compatible with TI's Code Composer Studio IDE. This combination provides a complete hardware development environment, including an integrated debug environment, compiler, and full hardware debug and trace capabilities on selected TI microcontrollers, processors, and wireless connectivity microcontrollers.

Other XDS Products:

1. XDS110 EnergyTrace HDR
2. XDS200
3. XDS560v2 System Trace with USB
4. XDS560v2 System Trace with USB and Ethernet
5. XDS560v2 PRO TRACE Receiver