Your Browsing History
Meet Your Seller
3pcs Pro Micro ATmega32U4 for Leonardo 5V 16MHz Development Board Micro-Controll
Limited time offer, ends 09/13 By TechDen
- The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with external USB interface
- 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Development boards such as Nano board
- It can accept voltage up to 9V DC as there is a voltage regulator on board.The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC
- 4 x 10-bit ADC pins, 12 x digital I/Os,Rx and Tx hardware serial connections
- Each one is in their own anti-ESD bag with 2 rows of header pins
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with external USB interface
9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Development boards such as Nano board
It can accept voltage up to 9V DC as there is a voltage regulator on board. The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC
4 x 10-bit ADC pins, 12 x digital I/Os, Rx and Tx hardware serial connections
Each one is in their own anti-ESD bag with 2 rows of header pins
9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Development boards such as Nano board
It can accept voltage up to 9V DC as there is a voltage regulator on board. The maximum voltage allowed on the RAW pin is 9V, 6-7V input recommended. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC
4 x 10-bit ADC pins, 12 x digital I/Os, Rx and Tx hardware serial connections
Each one is in their own anti-ESD bag with 2 rows of header pins
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 45 days
- Return for replacement within: 30 days
- This item is covered by TechDen Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...