ZK-J06 Dual MOS Tube Timing Delay Switch Circuit 12V-24V for Automation Control, Replaces Relay Modules

Product description Module introduction 1. Wide voltage operation (5~36V), most equipment can be used, very convenient; 2. The interface is clear and simple, powerful, easy to understand, and almost meets all your needs; 3. There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn; 4. Added sleep mode, after enabling it, without any operation within 5 minutes, the display will be automatically turned off; any keystroke will wake up; 5. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately; 6.

All setting parameters are automatically saved after power-off. With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Note: The module is an active live output, and the voltage at the output end (load end) is equal to the input end voltage (DC 5V--36V). The poles of'DC+' and load'+' are internally short-circuited, but the poles of'DC-' and load'-' cannot be short-circuited during use, otherwise the load will not be controlled to turn on and off, which is equivalent to the load being. It's always energized. Quiescent current of 15mA Working temperature range -4085 Optocoupler isolation for enhanced anti-interference Clear and simple interface Wide voltage operation (5~36V) for versatile equipment compatibility Independent OP, CL, LOP Emergency stop function with reverse connecti