Your Browsing History
Meet Your Seller
2pcs XL5430 Dual Output DC Power Voltage Module ±12V High Current Low Ripple TPS5430 Solution
- High-Precision Dual Voltage Regulation - Our DC Power Module ensures precise voltage symmetry with a deviation of less than ±1%, significantly outperforming s who offer ±5%. Whether you need ±3A independent outputs for your sensitive equipment or require a total power of 90W, this module delivers exceptional accuracy and reliability. Suitable for applications like ADC/DAC systems where ultra-low ripple (6mVpp) is essential.; Wide-Voltage Input & Design - Designed for durability and versatility, this power module operates within an input range of 6-28V, making it Suitable for industrial . With an operating temperature range of -40°C to 85°C, it withstands extreme conditions effortlessly. Plus, its compact size (43.36×43.13mm) ensures easy integration into your setup while maintaining high conversion efficiency at 92%.; Versatile Lab Solution - Simplify your lab setup by replacing three separate power supplies (+5V, +12V, +15V) with one compact module. This dual-channel regulator supports independent positive and negative voltage outputs, allowing you to configure ±1.5V to ±15V as needed.; Cold-Start Technology for - Experience worry-free operation even in freezing temperatures down to -40°C thanks to our advanced cold-start technology. Unlike traditional designs that rely on electrolytic capacitors, ours uses solid-state components to ensure reliable startup under any condition. Suitable for outdoor electronics, systems, and other demanding applications.; Customizabl
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Product description Product
Features Core solution: TI TPS5430 chip
Precision negative voltage output: - 1.5V to -15V adjustable (four fixed voltage + ADJ fine-tuning)
Voltage: Input 6-28V wide-voltage, operating temperature -40~85 Ultra-low noise
No-load ripple: 7-10mV
WARNINGS Correct order: GND
VIN V- Incorrect operation: Hot plug 100% arc burn!
Input Voltage: VOUT+3V VIN (e. g. -15V output requires 18V input)
Thermal Compulsory Requirement: Output > 1.5A must be mounted with heat sink (a hole on the back of the chip to assist in heat conduction). User pain point solution Thermal Design Backside uncovered oil over-hole + heatsink compatible position Jumper Set -5V/-9V/-12V/15V Selection Select 1 gear only! Ne gative voltage circuit design is complicated Plug & Play module instead of discrete components (save PCB area by 70%) equipment voltage fluctuation 6-28V wide voltage input compatible with engine ignition interference Low-temperature lab equipment downtime -40 direct startup without preheating
Product Parameter Size: 19.46 × 35.74 mm
Full load efficiency: 91% (-12V-------2A)
VIN+: Input Positive (6-28V) Connect GND first!
V-: Ne gative Voltage Output Negative Load Prohibit Ground ADJ: Voltage
Regulation Equation: R=[(5000×VOUT )-6105]/ 1.221
Q1: How to output - 7.5V?
Q2: Chip heating at no load?
Q3: What is the minimum input voltage for -5V output? Electronic OK Wire & Solder Wire 8-Color Wrapping Wire Add to Cart 30 Gauge 250M OK Wire Add to Cart 63-37 Tin Sol
Features Core solution: TI TPS5430 chip
Precision negative voltage output: - 1.5V to -15V adjustable (four fixed voltage + ADJ fine-tuning)
Voltage: Input 6-28V wide-voltage, operating temperature -40~85 Ultra-low noise
No-load ripple: 7-10mV
WARNINGS Correct order: GND
VIN V- Incorrect operation: Hot plug 100% arc burn!
Input Voltage: VOUT+3V VIN (e. g. -15V output requires 18V input)
Thermal Compulsory Requirement: Output > 1.5A must be mounted with heat sink (a hole on the back of the chip to assist in heat conduction). User pain point solution Thermal Design Backside uncovered oil over-hole + heatsink compatible position Jumper Set -5V/-9V/-12V/15V Selection Select 1 gear only! Ne gative voltage circuit design is complicated Plug & Play module instead of discrete components (save PCB area by 70%) equipment voltage fluctuation 6-28V wide voltage input compatible with engine ignition interference Low-temperature lab equipment downtime -40 direct startup without preheating
Product Parameter Size: 19.46 × 35.74 mm
Full load efficiency: 91% (-12V-------2A)
VIN+: Input Positive (6-28V) Connect GND first!
V-: Ne gative Voltage Output Negative Load Prohibit Ground ADJ: Voltage
Regulation Equation: R=[(5000×VOUT )-6105]/ 1.221
Q1: How to output - 7.5V?
Q2: Chip heating at no load?
Q3: What is the minimum input voltage for -5V output? Electronic OK Wire & Solder Wire 8-Color Wrapping Wire Add to Cart 30 Gauge 250M OK Wire Add to Cart 63-37 Tin Sol
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NovaStar Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...