Your Browsing History
- Free 30-day Returns
$12.93
Ships from China.
Meet Your Seller
10Pcs EC11 Rotary Encoder Switch Digital Potentiometer 15MM with Switch 5 Pins Derrated Shaft with Nut and Washer
- Push-life: 30,000±200cycles(0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour; Rating: Rated voltage: DC 5V; Maximum operating current (resistive load):10mA Max; Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank); Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank); Contact resistance: 100mor less(Voltage test at DC 5V 1mA); Bouncing: 10mS or less (Shaft shall be push at 1 cycles/s)
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
Specification Adjustment method: 360-degree
Number of pulses: 20
Pin Numbers: 5
Shaft Diameter: 6mm/ 0.24"
Shaft Height: 15mm/ 0.59"
Rated voltage: DC 5V
Maximum operating current (resistive load): 10mA
Max Contact resistance: 100mor less (Voltage test at DC 5V 1mA)
Bouncing: 10mS or less (Shaft shall be pushed at 1 cycles/s)
Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank)
Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank)
Push-life: 30, 000±200cycles( 0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
Number of pulses: 20
Pin Numbers: 5
Shaft Diameter: 6mm/ 0.24"
Shaft Height: 15mm/ 0.59"
Rated voltage: DC 5V
Maximum operating current (resistive load): 10mA
Max Contact resistance: 100mor less (Voltage test at DC 5V 1mA)
Bouncing: 10mS or less (Shaft shall be pushed at 1 cycles/s)
Insulation resistance: 100M Min (Measurement shall be made under the condition that a voltage of 250V DC is applied between individual terminals and bushing and plank)
Dielectric strength: Without arcing or breakdown (A voltage of 300V AC shall be applied for 1 minute between individual terminals and bushing and plank)
Push-life: 30, 000±200cycles( 0.5 Travel) Push 1Kgf to the shaft of the encoder in the axial direction under non-load conditions and with a speed of 600 times/hour
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by NovaStar Tech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...