JMT PCI-E X1 PCI Express 1X Riser Extension Ribbon Cable Gold-Plated Connector Dual Vertical 90 Right Angle Foldable High Speed PCI Express 1X Expander for 1U 2U ATX Extender (15cm R11SL)

Specification: 1. Supports high-speed PCI-E 1X, 4X, 8X and16X card, but work at 1X speed only. 2. New design with dual vertical 90 degrees direction for PCI-E Card. 3.
Cable length: 10cm/15cm/20cm/25cm/30cm optional; 4. High-Speed flexible cable is for 1U, 2U, and ATX/BTX chassis 5. Utilize high-quality flexible cable which is extremely soft and compact. 6. Easy to install and no need for a soft driver. 7. Golden finger protection cover and dustproof design. 8. Experienced design and durable material for High frequency and low attenuation. 9. PCB-Swaddled and fixed with Bolts and nut to prevent tearing and short circuit for PCB-Cable solder points. 10. Stable PCIe Gen3 8Gbps or higher speed with high-quality Axial Cable.
Note: (Pls read it carefully before place the order) 1. In order to prevent the device from burning out, please turn off the power before plugging in the cable and look for the direction of the slot. Please do not insert the reverse or the offset to avoid breaking the socket pin due to excessive force. 2. Do not bend and pull within 2cm of the welding of the two ends of the wire and the circuit board. 3. The conditions of the motherboard and device signal driving capability are different. As long as the extension cable is connected, the signal will be damaged, but it will not affect the main performance of the device. it ls ok to use. 4. Does not support aging and oxidation equipment 5. The actual object and the photo will be different because of the photo light, etc., but it will not affect the function.
Package included: 1 x Dual 90 Degree PCI-E X1 to X1 Extension Cable