JMT NGFF+MSATA to SATA3 Adapter Card M2 Key B-M SSD to 6G Interface Converter Card (Adapter Card)

Hardware requirements. With SATA interface motherboard, Notebook or adapter card. M2 KEY B-M SSD or MSATA. Product Detail?
Product Interface: SATA22PIN Male
Product Speed: 20Gbps/10Gbps
Support protocol: MSATA or M2 NGFF SATA, can not be used at the same time
System support: Compatible with
WIN7/WIN8/WIN10/WIN11/MAC/LINUX PS: Can only use a single card MSATA or M2 SSD, can not be used at the same time, does not support NVME M2.
Product Features: Transfer the motherboard KEY-B-M SATA definition or MSATA hard disk to SATA 22PIN interface, this adapter board only connects the signal from the M. 2 hard drive to the SATA 22PIN connector, so the adapter card does not require a driver. If you can't recognize the hard disk, please check if it is M. 2 interface or MSATA, the card Basically have no fault. Support all SATA standard M2. SSD, does not support the new NVME M2. SSD, does not support PCI-E M2 SSD! MSATA and M2 can not be used at the same time, need switch over MSATA and M2 disk. This card is suitable for 4 different SSD drive lengths, suitable for 3cm, 4.2 cm, 6cm, 8cm and other different M2 (NGFF) SSD drive lengths and full height MSATA drives. Using ceramic filter capacitors, high-power DC-DC voltage regulator control chip, stable performance point! The adapter card only changes the interface form of the SSD, and does not change any performance of your hard drive, what your original hard drive parameters, with the adapter card, the output interface performance will not change.