Your Browsing History
Meet Your Seller
XIITIA 4pcs ESP32-S3-DevKitC-1-N8R2 ESP32-S3 Type-C Development Board Wi-Fi + Bluetooth MCU Module Integrates Complete Wi-Fi and BLE Functions ESP32-S3-WROOM Module(Pre-soldered pins)
- Features: based ESP32-S3-WROOM-1 | 2x Type-C USB (OTG, UART) | 8MB Flash (Quad SPI) | 2MB PSRAM (Octal SPI) 31x I0 | ADC, DAC, I2C, SPI, UART, USB OTG | Compatible with MicroPython, Arduino and ESP-IDF | Default firmware: MicroPython. | USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended). | 5V and G (GND) pins | 3V3 and G (GND) pins. | ESP32-S3 is a MCU chip integrated with 2.4 GHz Wi Fi and Bluetooth 5 (LE), which supports Long Range mode. | ESP32-S3-WROOM-1-N8R2(8M Flash/2SRAM) | The cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host.
+
+
Overview
Specs
Reviews
Any questions? Our AI mode will help you find out quickly.
Try me now
_
Features: based ESP32-S3-WROOM-1
_ 2x Type-C USB (OTG, UART)
_ 8MB Flash (Quad SPI)
_ 2MB PSRAM (Octal SPI) 31x I0
_ ADC, DAC, I2C, SPI, UART, USB OTG
_ Compatible with MicroPython, Arduino and ESP-IDF
_ Default firmware: MicroPython.
_ USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended).
_ 5V and G (GND) pins
_ 3V3 and G (GND) pins.
_ ESP32-S3 is a MCU chip integrated with 2.4 GHz Wi Fi and Bluetooth 5 (LE), which supports Long Range mode.
_ ESP32-S3-WROOM-1-N8R2(8M Flash/2SRAM)
_ The cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host.
Features: based ESP32-S3-WROOM-1
_ 2x Type-C USB (OTG, UART)
_ 8MB Flash (Quad SPI)
_ 2MB PSRAM (Octal SPI) 31x I0
_ ADC, DAC, I2C, SPI, UART, USB OTG
_ Compatible with MicroPython, Arduino and ESP-IDF
_ Default firmware: MicroPython.
_ USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended).
_ 5V and G (GND) pins
_ 3V3 and G (GND) pins.
_ ESP32-S3 is a MCU chip integrated with 2.4 GHz Wi Fi and Bluetooth 5 (LE), which supports Long Range mode.
_ ESP32-S3-WROOM-1-N8R2(8M Flash/2SRAM)
_ The cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by TERRA HAVEN Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...