Upgraded Output Port 24V 50A 1200W DC Switching Power Supply, Universal Transformers PSU AC110V/220V (SMPS), 24 Volt Power Supply for 3D Printer, CCTV, DC Motor(Without Power Cord)

AC/DC 24V Power Supply This 24V 50A 1200W power supply features an input of AC 110/220V and a default DC 24V output, with an adjustable range of ±10%. The adjustable voltage range is 21.6V-26.4V, which significantly broadens its application scope and can deliver up to 960 watts of maximum power with an efficiency reaching 80%. When connecting equipment with high peak variations, such as motors, please choose a power supply at least 2 times greater than the equipment's rated power for safety. AC/DC 24V Power Supply This 24 volt power supply offers three output channels to power multiple load devices. The updated output ports and added power port remove the requirement to connect separate power cables (Fire, Ground, and Zero). An installation bracket and connection terminal accessory package enable easier and quicker connections. Good Heat Dissipation The power transformer is constructed from porous metal aluminum material, providing low noise and effective, stable heat dissipation. The 1200W power supply includes an intelligent temperature control fan. The fan runs only when a specific temperature is attained to prevent overheating and failure. The operating temperature range for this switching power supply is 14 to 140. Multiple Protections This 24 Volt 50A 1200W DC power supply undergoes strict testing before leaving the factory. A smart chip provides overload auto power off, over voltage auto power off, over heat auto power off, and short circuit protection. The 110V to 24V converter is RoHS, CE, LVD, and EMC safety certified. It employs a lead-free process and meets environmental protection RoHS requirements. Input Voltage 115V/230V A voltage switch is located on the side of the 24V DC transformer. It is factory-set to 115V. Before use, please verify and switch to your local country's voltage to prevent damage from voltage mismatch. Wide Applications The unit converts AC mains power to low voltage DC 24V with a peak power of 50A (1200 watts). It works excellently with most 24V devices under 1200 watts, such as LED strips, 3D printers, and ham radios. The power supply will automatically output 0~40A to match your device. The actual current depends on the load: examples include 10A (240W), 15A (360W), 20A (480W), 33.3A (800W), and 40A (960W). Please ensure your load device matches the 24V supply voltage and the current draw is under 50A. Do not overload it and do not use it as a charger; it is a voltage converter