Meet Your Seller
600W MOSFET PWM Trigger Drive Module DC 4V-60V 10A Electronic Switch Controller High/Low Level Signal Control MOS Tube Power Control Board for Motors LEDs Pumps Solenoid Valves
- Operates from DC 4V-60V and provides DC 4V-60V output capacity for high-voltage, high-power MOS switching control.
- Delivers up to 600W with 10A constant current at room temperature; current can reach 15A with auxiliary heat dissipation.
- Supports high-level triggering from DC 3.0V-24V, turning the MOS tube on when the input signal is within this range.
- Supports low-level triggering from DC 0V-0.6V, turning the MOS tube on when the input signal is within this range.
- Do not use trigger signals between 0.6V and 3.0V; the source specifies this range is not suitable for MOS operation.
- Supports high-level, low-level, switch-control, and PWM control modes; PWM input can regulate motor speed and lamp brightness.
- Only one control signal may be used with the module at a time; two or more signals cannot control the module simultaneously.
- Output end can control high-power equipment including motors, bulbs, LED belts, DC motors, micro pumps, and solenoid valves.
- Features dual MOS shunt active output and measures 4.6 x 2.9 x 1.5 cm, with an operating temperature range of -40 to 85.
Any questions? Ask CelesteSM will help you find out quickly.
Product Description:
High-power MOS FET trigger drive module for controlling DC loads through high-level, low-level, switch, or PWM signals. It can be used for speed control and brightness adjustment of connected DC equipment.
Core Selling Points:
Supports high-level and low-level triggering, switch control, and PWM control. Features dual MOS shunt active output with low internal resistance for high-current operation. Designed to control high-power DC loads such as motors, bulbs, LED strips, micro pumps, and solenoid valves.
Technical Specifications:
Working voltage: DC 4V-60V. Trigger input: high level DC 3.0V-24V; low level DC 0V-0.6V. PWM signal frequency: 0-2.5 kHz. Output capacity: DC 4V-60V; 10A constant current at room temperature; 600W. Current can reach 15A with auxiliary heat dissipation. Operating temperature: -40 to 85. Size: 4.6 x 2.9 x 1.5 cm.
Before Purchase:
Use only one control signal at a time. For high-level triggering, keep the signal outside 0.6V-3.0V: the MOS FET turns on at DC 3.0V-24V and turns off below 0.6V. For low-level triggering, the MOS FET turns on at DC 0V-0.6V and turns off above 3.0V. Do not use a signal voltage between 0.6V and 3.0V.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by GeekSpace Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory









