Your Browsing History
Meet Your Seller
Visit EmpressTech Store
FOLLOW
2PCS H Bridge Remote Control 5A 3V-14V Dual DC Motor Controller Drive Module Voltage Reverse PWM Speed Regulation Double
- 2PCS H Bridge Remote Control 5A 3V-14V Dual DC Motor controller Drive Module Voltage Reverse PWM Speed Regulation Double; Two motors can be independently controlled, each channel can output 5A, peak 9A, standby current is only 10uA;; Wide voltage range of 3-14 v, signal voltage range of 2.2-6 v, 3.3 v and 5 v levels can be satisfied;; The board provides 3.3v 100ma power supply to the power consumption of your operating system; Two-way H-bridge motor drive, can drive two DC motors or a 4-wire two-phase stepper motor at the same time;; the input voltage is 2.2-6 v, support 3.3v and ttl level;; Single working current is 5A, peak current can reach 9A, low standby current (less than 10uA);
+
+
Overview
Specs
Reviews
Any questions? Ask CelesteSM will help you find out quickly.
Try me now
Product description
Highlights: 1.1. Two motors can be independently controlled, each channel can output 5A, peak 9A, standby current is only 10uA; 1.2. Wide voltage range of 3-14 v, signal voltage range of 2.2 -6 v, 3.3 v and 5 v levels can be satisfied; 1.3. The board provides 3.3 v 100ma power supply to the power consumption of your operating system
Product parameters: 1. Two-way H-bridge motor drive, can drive two DC motors or a 4-wire two-phase stepper motor at the same time; 2. Power supply module 3 v-14 v; 3. the input voltage is 2.2 -6 v, support 3.3 v and ttl level; 4. Single working current is 5A, peak current can reach 9A, low standby current (less than 10uA); 5.
Mounting hole diameter: 2mm.
Package Inckuded: 2 * 5A dual motor drive Motor drive logic table D0D1D2D3 connect to the microcontroller IO or other signal source, motor1, motor2 connected to the motor.
Note: '1' represents a high level, '0' represents a low level, and 'PWM' represents a pulse width modulated wave, adjusting the duty cycle to change the speed.
Highlights: 1.1. Two motors can be independently controlled, each channel can output 5A, peak 9A, standby current is only 10uA; 1.2. Wide voltage range of 3-14 v, signal voltage range of 2.2 -6 v, 3.3 v and 5 v levels can be satisfied; 1.3. The board provides 3.3 v 100ma power supply to the power consumption of your operating system
Product parameters: 1. Two-way H-bridge motor drive, can drive two DC motors or a 4-wire two-phase stepper motor at the same time; 2. Power supply module 3 v-14 v; 3. the input voltage is 2.2 -6 v, support 3.3 v and ttl level; 4. Single working current is 5A, peak current can reach 9A, low standby current (less than 10uA); 5.
Mounting hole diameter: 2mm.
Package Inckuded: 2 * 5A dual motor drive Motor drive logic table D0D1D2D3 connect to the microcontroller IO or other signal source, motor1, motor2 connected to the motor.
Note: '1' represents a high level, '0' represents a low level, and 'PWM' represents a pulse width modulated wave, adjusting the duty cycle to change the speed.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by EmpressTech Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...













