
With 4 Way Daisy Chain Cables
JOYO AC-DC 9V 800mA - 1A Pedal Power Charger Adapter
Smart and Professional IC chips for noise reduction and isolation safe protection performance. 4 way cable daisy chain could power supply for 4 pedals at the same time. It works with most brands pedals is requiring tip negative 9V to minimize or eliminate the need to change batteries.
DC 9V 800mA-1A Pedal Power Supply (Center Negative)
- With a professional low-noise switching power supply integration solution, it is high-efficient and low-consumption DC adapter.
- The internal filter inductor is a clean and stable DC power for the output, and it has a good inhibitory effect on electromagnetic radiation interference.
- With Precise plug-in and chip component design and production, the power supply is more stable.
- The output port adopts the tuning fork groove plug for better contact and short circuit protection.

Details

Smart IC Chip Component
- DC9V 800mA pedal adapter
- Noise reduction and short circuit protection
- High-efficient and low-consumption DC adapter

Center Negative (-) Design
- Barrel Size: 5.5*2.1mm
- Compatible with most pedal models
- With protection of short circuit, overcurrent, overheat, overload, the adapter work is safer

Good PVC + Pure copper core
- 4 way cable daisy chain could power supply for 4 pedals at the same time
- All materials meet RoHS environmental requirements;CE, FCC, UL, etc certified

Pure Copper Wire
- Premium PVC + low impedance pure copper wire
- Good insulation and low impedance
Power Supply Usage Tip
This adapter works great for most analog pedals (distortion, overdrive, EQ, etc.).
If you're using it with digital pedals (delay, reverb, looper, multi-fx), please note:
- Digital pedals draw 2–3x higher current for a split second when powered on.
- Connecting multiple digital pedals to one adapter may cause them to fail starting up — even if total current seems fine.
Suggestion:
- Use a dedicated power supply for digital pedals.
- Keep total current under 80% of the adapter's rating.
Specifications
Can I use this power supply with digital effect pedals?
It works best with analog pedals (distortion, overdrive, EQ, etc.). For digital pedals (delay, reverb, looper, multi-fx), please read the tips below.
Why won't my digital pedals start even if total current is within the rating?
Digital pedals draw 2–3x higher current for a split second when powering on. If multiple digital pedals start at the same time, the combined peak may exceed what the adapter can deliver — causing them to fail starting up.
Is my adapter defective if it won't power my digital pedals?
Not necessarily. This is usually a compatibility issue between digital pedals and the adapter, not a defect. The adapter may work fine with analog pedals or a single digital pedal.
How should I use this adapter with digital pedals?
• Connect the adapter to power first, then plug in pedals one by one.
• Keep total current under 80% of the adapter's rating to leave room for startup peaks.
• If possible, use a dedicated power supply for digital pedals.
More Pedal Power Adapter Choice


JOYO AC-DC 9V 800mA - 1A Pedal Power Charger Adapter
Smart and Professional IC chips for noise reduction and isolation safe protection performance. 4 way cable daisy chain could power supply for 4 pedals at the same time. It works with most brands pedals is requiring tip negative 9V to minimize or eliminate the need to change batteries.

Effect Pedal Power Adapter
DC 9V 800mA-1A Pedal Power Supply (Center Negative)
- With a professional low-noise switching power supply integration solution, it is high-efficient and low-consumption DC adapter.
- The internal filter inductor is a clean and stable DC power for the output, and it has a good inhibitory effect on electromagnetic radiation interference.
- With Precise plug-in and chip component design and production, the power supply is more stable.
- The output port adopts the tuning fork groove plug for better contact and short circuit protection.
Details

Smart IC Chip Component
- DC9V 800mA pedal adapter
- Noise reduction and short circuit protection
- High-efficient and low-consumption DC adapter

Center Negative (-) Design
- Barrel Size: 5.5*2.1mm
- Compatible with most pedal models
- With protection of short circuit, overcurrent, overheat, overload, the adapter work is safer

Good PVC + Pure copper core
- 4 way cable daisy chain could power supply for 4 pedals at the same time
- All materials meet RoHS environmental requirements;CE, FCC, UL, etc certified

Pure Copper Wire
- Premium PVC + low impedance pure copper wire
- Good insulation and low impedance
Power Supply Usage Tip
This adapter works great for most analog pedals (distortion, overdrive, EQ, etc.).
If you're using it with digital pedals (delay, reverb, looper, multi-fx), please note:
- Digital pedals draw 2–3x higher current for a split second when powered on.
- Connecting multiple digital pedals to one adapter may cause them to fail starting up — even if total current seems fine.
Suggestion:
- Use a dedicated power supply for digital pedals.
- Keep total current under 80% of the adapter's rating.
Specifications
| Input | AC100V-240V, 50/60Hz, 0.2A,4.5W-6.5W. |
|---|---|
| Output | 9V DC, 800mA, Max 1A (1000mA) |
| Polarity | Center Negative |
| Barrel Size | 5.5*2.1mm |
| Cord Length | 4.92 ft/1.5 m |
| Package included | 1 x JOYO Power Supply Adapter 9V DC 800mA (4.9FT), 1 x 4 Way Daisy Chain Pedal Cables(3.9FT). |
Can I use this power supply with digital effect pedals?
It works best with analog pedals (distortion, overdrive, EQ, etc.). For digital pedals (delay, reverb, looper, multi-fx), please read the tips below.
Why won't my digital pedals start even if total current is within the rating?
Digital pedals draw 2–3x higher current for a split second when powering on. If multiple digital pedals start at the same time, the combined peak may exceed what the adapter can deliver — causing them to fail starting up.
Is my adapter defective if it won't power my digital pedals?
Not necessarily. This is usually a compatibility issue between digital pedals and the adapter, not a defect. The adapter may work fine with analog pedals or a single digital pedal.
How should I use this adapter with digital pedals?
• Connect the adapter to power first, then plug in pedals one by one.
• Keep total current under 80% of the adapter's rating to leave room for startup peaks.
• If possible, use a dedicated power supply for digital pedals.
More Pedal Power Adapter Choice
![]() 9V 800mA-1A Power Supply | ![]() 9V 1.2A Power Supply | ![]() 12V 1.5A Power Supply | ![]() 9V 500mA Power Supply | ![]() Guitar Pedal Power Supply | ![]() Rechargeable Power Supply | ![]() Power Supply Tuner Pedal |
|---|---|---|---|---|---|---|
| Customer Reviews | ||||||
| — | — | — | — | — | — | — |
| Price | ||||||
| — | — | — | — | — | — | — |
| Output Voltage | ||||||
| DC 9V | DC 9V | DC 12V | DC 9V | DC 9V/12V/18V | DC 9V/12V/18V | DC 9V |
| Output Current | ||||||
| 800mA-1A | 1.2A | 1.5A | 500mA | 100mA/500mA | 100mA/500mA | 100mA/500mA |
| Multi-Way Daisy Chain Cables | ||||||
| 4 Way Daisy Chain | 5 Way Daisy Chain | 5 Way Daisy Chain | None | None | None | None |
| Reversed Polarity Cable | ||||||
| None | 1PC | 1PC | None | 2PCS | 1PC | None |
| Power Adapter Polarity | ||||||
| Negative Center | Negative Center | Negative Center | Negative Center | Negative Center | Negative Center | Negative Center |
| USB Port | ||||||
| ? | ? | ? | ? | ? | ? | ? |































































































