• $33.99
  • Price alert
    Shop it at NeweggBusiness.

    3ft USB to TTL Serial Cable 3.3V 3 Pin TX RX Signal UART Adapter Debug Cord Genuine FTDI FT232RL Chip Compatible with Windows 11 10 8 7 Linux MAC OS 3Pin 3v3 2.54mm Dupont Female Header

    • 3 ft short USB to TTL serial adapter FTDI chip with 3 pin 0.1 pitch female socket header connects devices with 3.3 V logic level UART signals interface to a laptop via USB 2.0 port (232r-3v3)
    • 3.3v TTL to USB cable is built with a genuine FT232R chip module in USB 2.0 type A male terminal for wider compatibility and reliable data transfer rates
    • 3 feet USB to UART TTL serial cable 3.3 volt features 3 way output 2.54mm flying lead jumper wires to provide access to Tx transmit, Rx receive and GND (TTL-232R-3V3)
    • USB to TTL 3.3v built with FT232 FTDI chip on the PCB board has configurable internal EEPROM and 3V3 UART signals can be individually inverted by configuring the EEPROM
    • USB-TTL converter chord is compatible with Windows 11, 10, 8, 8.1, 7, 2008/XP/Vista/CE, Mac OS, Linux; ideal USB 2.0 debug data communication cord for Vendor ID re-write, mini computer, router, printer, GPS, set top box, transmitter, flash firmware on hard drive, video display terminal, etc.
    +
    +
    Overview
    Specs
    Reviews
    avatar

    Any questions? Our AI beta will help you find out quickly.

    3-Foot USB TTL serial adapter built with FTDI FT232RL chip for 3.3V logic level serial communication (rx, tx and GND)

    It is built with FT232r chip that its royalty-free VCP driver allow for communication as a standard COM port and D2XX direct drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc.

    The original FT232 chip is embedded in the USB-A end; 3 way 0.1 header connector with GND (ground), RX and TX at 3V3 logic level.

    Applications:

    Upgrading Legacy Peripherals to USB

    Interface Microcontroller UART or I/O, FPGA / PLD to USB

    As a switching device in driving lamps and relays

    Replace MAX232 type level shifters allowing for direct connection of products to PC

    Used in processors of mini computers like DEC VAX

    Industrial Control, USB Software, Hardware Encryption Dongle, printer, video display terminals, Oscilloscope, measurement device, microprocessor, light and remote controller, etc.

    The I/O pins of the USB to uart wire are configured to operate at 3.3v logic level - Entire USB protocol handled by the electronics in the cable;

    UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;

    Data transfer rates from 300 to 3M baud rate at TTL levels;

    Internal EEPROM with users writable area; Supply voltage comes from USB bus, no external supply required;

    UHCI / OHCI / EHCI host controller compatible

    Interfaces: USB 2.0 type A Male Port ; 3 pin Female Socket flying leads

    Supports Windows 2008, XP, Vista , CE 4.2, 5.0 and 6.0, Windows 11, 7, 8, 8.1, 10; Mac, Linux

    NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FT232 chip official website

    Whats Included

    1x Type A male USB to Serial TTL Level Converter Cable 3 ft

    1x Manual

    Warranty & Returns

    Warranty, Returns, And Additional Information

    Warranty

    • Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
    • CONTACT

    Return Policies

    Manufacturer Contact Info

    LOADING...