7/8 inch Motorcycle Handlebar Charger
Efficient Charge: USB & Type-C port support QC 3.0 fast charging technology. Allow you to charge two devices simultaneously. If your device supports QC 3.0 fast charging or SCP and FCP Charging Technology. Then this device would be the best choice rather than the traditional Motorcycle Charger.
Motorcycle Handlebar Charger
Nilight Motorcycle USB & Type-C Charger
- Specification:
- Output: 5V / 3.4 A, 9V / 2.5 A, 12V / 2A;
- Product material: ABS;Independent On/Off Power Switch;USB & Type-C Fast Charger.
- FITMENT: Apply for the diameter of 7/8” grips or any surface.
- This USB charger not only fits 12V motorcycles, bicycles, scooters, ATVs, snowmobiles, and UTVs. But also fits automotive cars, SUVs, RVs, Campers, trucks, tractors, etc.
Features
Waterprrof and Dustproof
The cover protects the internal circuit and keeps the USB charger and switch from rain and dust by closing the caps when you are not using it.
7/8inch Handlebar
Nilight Dual USB phone charger suits for any 7/8 inch handlebar or flat surface charging.
Easy Installation&Connection
The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface.
Fused SAE to Oring cable
It's designed with a 10 A fused extension cord for safer phone charging.
Product Details
Independent switch
An Independent ON/OFF power switch saves power and prevents the battery from draining when idle. This switch controls both the voltmeter and the USB port. No worrying about the battery being drained off with the item powered on for a long while.
LED Digital Voltmeter
It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.
Wiring & Polarity Instruction
Wire Length:
- From the pigtail of the item to the end of the SAE receptacle: 42.5 inches
- SAE to O ring wiring harness: 4.53 inches.
Easy Installation
Package:1x Motocycle USB Adapter;1x SAE Extension Cable;1x Handlebar Mounting Bracket;1x Screw Mounting Bracket;1x Non-slip Washer;1x Large Screw;1x Small Screw;1x Handlebar Fixing Screw.
7/8 inch Motorcycle Handlebar Charger
Efficient Charge: USB & Type-C port support QC 3.0 fast charging technology. Allow you to charge two devices simultaneously. If your device supports QC 3.0 fast charging or SCP and FCP Charging Technology. Then this device would be the best choice rather than the traditional Motorcycle Charger.
Motorcycle Handlebar Charger
Nilight Motorcycle USB & Type-C Charger
- Specification:
- Output: 5V / 3.4 A, 9V / 2.5 A, 12V / 2A;
- Product material: ABS;Independent On/Off Power Switch;USB & Type-C Fast Charger.
- FITMENT: Apply for the diameter of 7/8” grips or any surface.
- This USB charger not only fits 12V motorcycles, bicycles, scooters, ATVs, snowmobiles, and UTVs. But also fits automotive cars, SUVs, RVs, Campers, trucks, tractors, etc.
Features
Waterprrof and Dustproof
The cover protects the internal circuit and keeps the USB charger and switch from rain and dust by closing the caps when you are not using it.
7/8inch Handlebar
Nilight Dual USB phone charger suits for any 7/8 inch handlebar or flat surface charging.
Easy Installation&Connection
The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface.
Fused SAE to Oring cable
It's designed with a 10 A fused extension cord for safer phone charging.
Product Details
Independent switch
An Independent ON/OFF power switch saves power and prevents the battery from draining when idle. This switch controls both the voltmeter and the USB port. No worrying about the battery being drained off with the item powered on for a long while.
LED Digital Voltmeter
It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.
Wiring & Polarity Instruction
Wire Length:
- From the pigtail of the item to the end of the SAE receptacle: 42.5 inches
- SAE to O ring wiring harness: 4.53 inches.
Easy Installation
Package:1x Motocycle USB Adapter;1x SAE Extension Cable;1x Handlebar Mounting Bracket;1x Screw Mounting Bracket;1x Non-slip Washer;1x Large Screw;1x Small Screw;1x Handlebar Fixing Screw.
Motorcycle Handle Bar Parts
Motorcycle Lights
Motorcycle Headlight Bulbs
LED Work Light
Motorcycle Tire Pump
Car Interior Strip Lights
Whip Lights
Rocker Switch Panel
Toggle Switches