Central Air Conditioning Wall Control Panel Thermostat, Fan Coil Unit Temperature Controller, Colorful Screen Thermostat with Large Round Display

Installation and Usage Instructions:

The power cord must be installed correctly. The live wire and neutral wire should not be connected in reverse, as this could damage the thermostat. 2. At the front end of the temperature control system, a power control switch or a separate power socket should be added. When the temperature control system is not in use, the power should be cut off.

3. The liquid crystal temperature control panel requires a stable power supply for its operation. Abnormal power cuts and sudden power fluctuations may cause the temperature control panel to shut down or malfunction. Regardless of the nature of the power cut, the subsequent power restoration may result in the cessation of the heating system. Therefore, if the panel is found to be shut down during normal heating, it is necessary to promptly start the temperature control panel to enter the working state. 4. The LCD temperature control panel has an automatic memory function. When the power supply is cut off and then restored, it can automatically switch to the working state it was in before the power was cut off.

5. The temperature control system equipped with an electric actuator has two modes: maintaining heating and cutting off heating. It should be selected based on actual needs. 6. The installation position of the thermostat should be representative and not be affected by other heat sources or flowing air.

Warning: The wiring must be done in accordance with the electrical wiring diagram. Do not allow water, mud, or other impurities to enter the thermostat; otherwise, the device will be damaged!