Weastlinks Visual Smart M.2 NVMe / SATA SSD Enclosure, USB 3.2 Gen 2 10Gbps, External M2 Adapter Case Support M-Key B+M Key UASP Trim

Features:

New Upgrade Function:
1. 3 clicks to reconnect the drive (no need to disconnect the cable).
2. 5 clicks to turn on write protection (exit requires unplugging the cable again).
3. Multi-color LEDs.

Display visual Dual M.2 protocol SSD enclosure.

Built-in RTL9210B dual protocol 10G high-speed master control theoretical read/write speed up to 1000M. Support both NVMe protocol and SATA protocol.

Supports TRIM, ASPM, UASP acceleration, and sleep mode.

Plug-and-play, allowing data transmission across multiple devices such as desktops, laptops, cell phones, tablets, cameras, etc. at high speed across platforms and scenes.

Compact body with good feel Length only 103mm Width only 32.5mm Thickness only 11.5mm.

Multi-fin on all sides to support heat dissipation, so that the disk is always running at normal temperature, and always take care of the disk.

Insists on using the high cost superconducting thermal conductivity pad and all-aluminum heat dissipation method to prevent the disk from being "baked" in the enclosure and reducing the life of the disk.

Can read and write for a long time with high intensity, which is suitable for professional-level uninterrupted applications. Can run Win To Go, VmWare virtual machine for a long time, large games, large 8K RAW video editing and other high-intensity professional applications.

It Can Also Display:
Disk Model.
Capacity of the Disk.
Partition of the Disk.
Disk Temperature.
Total Host Reads.
Total Host Writes.
Power on Hours.
Power on Count.
Unsafe Shutdowns.
Health Status Percentage.
Current Connection Speed.
USB2.0 480M or USB3.2 GEN1 5G or USB3.2 GEN2 10G.

1G File Transfer in 1 Second.NVMe enclosure adopts USB 3.1 Gen 2 transfer speed up to 10Gbps,NOTE: SATA SSD ONLY SUPPORT 6Gbps (600Mb/s Max).

How to set write protection:
Enter write protect: touch the screen 5 times, then re-plug the cable to enter protect mode (red light to long blue).
Exit write protect: touch the screen 5 times, then re-plug the cable exit protect mode (long blue light to red light).
Note: Write protection with memory function, so as long as you don't exit the write protect function, it will remain in protected mode.

Support Both NVMe and SATA SSD:
Supports both M.2 NVMe (M-Key,B&M-Key) and M.2 SATA(B&M-Key).

Two Cables Inside (Gift):
1pcs TYPE C To C USB 3.2 Gen2 Cable.
1Pcs TYPE A To C USB 3.2 Gen2 Cable.



Packing List:
1 x NVMe/SATA SSD Enclosure