plug-and-play
The A1 mini is precisely pre-assembled, pre-squared and pre-tuned. It takes only about 20 minutes to set up for the first print.
Active Motor Noise Reduction
A1 mini can calibrate parameters to match the small individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Fully automated calibration
The A1 mini handles all kinds of calibration itself. It automatically and accurately calibrates Z-axis offset, bed level, vibration resonance and nozzle pressure for each print job.
Active flow rate compensation
The A1 mini revolutionises flow control in 3D printing. It utilises a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithms actively compensate the flow rate based on the readings for accurate extrusion.
A1 mini Technical Specifications
| Hot End: | All-Metal |
|---|---|
| Extruder Gears: | Steel |
| Nozzle: | Stainless Steel |
| Max Hot End Temperature: | 300 |
| Nozzle Diameter (Included): | 0.4 mm |
| Nozzle Diameter (Optional): | 0.2 mm, 0.6 mm, 0.8 mm |
| Filament Cutter: | Yes |
| Filament Diameter: | 1.75 m |
| Gross weight | 8.2 kg |
| Maximum acceleration of tool h | 10000 millimeters per second |
| Maximum speed of tool head | 500 millimeters per second |
| Filament bounce sensor | Yes |
| Fine filament odometer | Yes |
| Power loss recovery | Yes |
| Filament entanglement sensor | Yes |