CORN SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5" with External AC Power Adapter

PRODUCT INTROCUTION: This USB 2.0 to IDE / SATA drive adapter implements a bridge between a USB port and one SATA, ATA or ATAPI based mass storage device port. This usb hard drive adapter could turns any standard IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The ide to usb adapter supports all existing IDE/ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM and 2.5 and 3.5 IDE and SATA hard drives.
Hardware Install:
1. Comfirm device is under master mode.
2. Connect SATA/IDE connector to SATA/IDE device.
3. Connect AC power to SATA/IDE device.
4. Connect cable to USB port of computer.
Driver Install:
1.
Window98: Insert Driver CD to CDROM and run
X: \win98\setup. exe before you insert the cable to your computer.
2.
Windows2000/me/XP: You don't need to install any driver.
3.
Mac 8.6 or higher: Copy Fene USB SATA/IDE_05E3_0702. sit to desk to desk to pand double click it to get driver file. Then copy the driver file to [System Folder][Extensions]. After that, connect cable to computer and reboot the system.
PRODUCT FEATURE: * Connect to the IDE device using USB interface and SATA device too * USB 2.0 standard, Full speed, 480M bps full speed * Transfer rate up to 480MBps (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver * USB 1.1 device interface can be use, (Backward compatible to USB 1.1 ) * Complies with ATA/ATAPI-66 Specification 1.0 * Easy to use and plug & play * Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec. ) * External power adapter included, for power up the 5V/12V IDE/ATAPI devices Usage * For easy connect to the IDE device / SATA device and make the hard disk device more portable
Components: 1.
USB to SATA/IDE cable: used to connect SATA/IDE device to computer with USB port.
2. Power with 12V and 5V double channel output: used to supply power to SATA/IDE device.
Package Include: 1x USB to SATA/PATA/IDE Cable 1 x 2.5A Power adapter 1 x Trigonometric plug power cable (US regulations) 1 x SATA data cable 1 x SATA power adapter cable