waveshare 5inch HDMI LCD Resistive Touch Screen Display 800x480 High Resolution Monitor HDMI Interface Fits Raspberry Pi with Bicolor Holder Case Lower Power Consumption

The LCD 800x480 high hardware resolution Resistive touch control Compatible with RPi A+/B+/2B/3B/3A+/3B+ Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Backlight can be turned off to lower power consumption High quality immersion gold surface plating The
Case Material: high quality bicolor Acrylic, black and white Comes with bottom holder, optional tilt angle, 45° or 60° Features mounting holes for Raspberry Pi A+/B+/2B/3B/3A+/3B+ PACKAGE CONTENT 1. 5inch HDMI LCD x1 2. HDMI connector x1 3. HDMI to micro HDMI connector x1 4. Touch pen x1 5. RPi screws pack (4pcs) x1 6. Bicolor Case for 5inch LCD x1 7. Screws Pack x1 8. Quick start sheet x1 100% original from Waveshare, support technical service, please contact us! FAQ Why the LCD doesn't work with my Raspbian? To use the LCD with the RPi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the RPi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

Which power supply should I use? It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.