for Raspberry Pi Pico Flexible Microcontroller Board Based on RPi RP2040 Chip Featured Dual-core ARM Cortex M0 with Pre-soldered Header,Breadboard & Wires

Pico Features RPi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates RPi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins. For software development, either Pi's C/C++ SDK, or the MicroPython is available. There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly. Key features RP2040 microcontroller chip designed by Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of on-board Flash memory Castellated module allows soldering direct to carrier boards USB 1.1 with device and host support Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor Accelerated floating-point libraries on-chip 8 × Programmable I/O (PIO) state machines for custom peripheral support Package List 1.

For Raspberry Pi Pico with pre-soldered header (mono) x1 2. 1*3PIN yellow pin header x1 3. Breadboard x1 4. USB-A to micro-B cable x1 5. Jumper wires x1