SIM7080G NB-IoT/Cat-M(EMTC) / GNSS Module HAT for Raspberry Pi Pico Series Board, Global Band Support

Features The Pico-SIM7080G-Cat-M/NB-IoT is an NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency band, can be controlled via serial AT commands, and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on. Standard Pi Pico header, fits Raspberry Pi Pico series boards UART communication, serial AT commands control
Communication protocol support: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT...
GNSS positioning support: GPS, GLONASS, BeiDou, and Galileo Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharging it in turn 2x LED indicators, for monitoring the module operating status Onboard Nano SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available) Comes with development resources and manual (MicroPython examples) Package List 1. Pico-SIM7080G-Cat-M/NB-IoT x1 2. LTE antenna x1 3. GPS antenna x1 4. 20PIN female pin header x2 5. 40PIN male pin header × 1 6. 3.7V rechargeable Li-po battery x1
Resources download:
http: //www. waveshare. com/wiki/Pico-SIM7080G-Cat-M/NB-IoT