Meet Your Seller

Riveira Store

See Seller Store

Main image of Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Alt view image 2 of 5 - Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Alt view image 3 of 5 - Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Alt view image 4 of 5 - Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Alt view image 5 of 5 - Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Shop All ARCTIC Products | Visit Riveira Store

Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

[High-performance DSP] Sipeed Tang Primer 20K Core Module board is sodimm package,uses GW2A-LV18PG256C8I7 as the main chip, and hasmultiple internal resources, such as high-performance DSP,high-speed LvDs interface and BSRAM resources, on-boardDDR3 and PMIC. Users could use this CM board for rapiddevelopment and verify, and it's suitable for high-speedand low-cost situations.
[Run RISC-V Code] Users can burn the hardware code bitstream file ofPicoRV/Litex to Gw2A, and then use GW2A as acommon MCU. lt can run RISC-V code, conduct RISC-v soft core experiments
[Verilog Design] Users use Verilog to design custom hardware func-tions on the basic of PicoRV/Litex lP core, and at thesame time use C language to write code running onPicoRV/Litex core.
[Rich Peripheral interfaces]Sipeed Tang Primer 20K Dock is equipped with a wealth of pe-ripheral resources, such as onboard USB-JTAG & UARTperipheral , Ethernet PHY and RJ45 connector, USB2.0PHYHDMIl output connector,Audio outpu

Overview

Specs

Reviews

Any questions? Our AI beta will help you find out quickly.

Try me now

-Specification-
Brand Name: MaixPy
Demo Board Type: FPGA
Memory128M DDR313Row x 10Col x 8banks x 16bits
Flash32Mbits NOR FlashW25Q32JVS
DebuggerJtag + UartJST SH 1.0 8Pins connector
SD card slot 1Push-pull type
Display8Pins spi lcd connector
Package 204P DDR3
Avaliable IO117
RGB Interface1x RGB565 40P FPC Connector
DVP Interface1x 24P FPC Connector
Mic array Interface1x 10P FPC Connector
Touch Interface: 1x 4P FPC Connector
PMOD Interface: 4
3.5 mm headphone Jack: 1x LPA4809MSF driver
DIP switch: 1x 5P DIP switch
Slide switch: 1x Switch USB function

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
CONTACT

Return Policies

Return for refund within: 30 days
Return for replacement within: non-replaceable
This item is covered by Riveira Store Return Policy

Manufacturer Contact Info

For a directory of all our manufacturers, please click below.
Manufacturers Directory

Item#: 9SIBRESKGN4201