ViaBecs 16 PIN Car Radio Wiring Harness for Nissan Rogue, Altima 13-18, Qashqai X-Trail Frontier Sentra 14-18, Stereo Wire Cable Fit Aftermarket Android Head Unit, Retain SWC, Backup Camera, Bose A

Fits Non-Screen or 4.3 Inch OEM Screen- CAN011-R stereo harness is designed for compatible Nissan low/mid trim models with no factory screen or a 4.3 inch OEM screen. If your original radio has a factory 7 inch screen, choose CAN008-X instead to avoid the wrong radio wiring harness. ^^ Not For 7 Inch OEM Screen- This radio harness adapter is not intended for Nissan high/top trim radios with a 7 inch factory screen. Fitment depends on model year, trim level, dashboard screen size, factory radio plug, and Android stereo power socket.

^^ Check 16 Pin Radio Port- Designed for compatible Android car stereos with a 16-pin power connector. This stereo wiring harness is not for ISO power ports or Alpine, Sony, Pioneer, Dual Electronics, JVC, BOSS Audio Systems, Kenwood, or other proprietary stereo power sockets. ^^ Low And Mid Trim Fitment- Fits selected
Nissan low/mid trim models: Rogue 2013-2018, Altima/Teana 2013-2018, Qashqai J11 2014-2018, X-Trail 2014-2018, Frontier/Sentra 2014-2019, Versa 2015-2018, Murano 2013 - 2018 and Navara NP300 2014-2021. Check screen and plug before ordering. ^^ Retain Factory Features- This aftermarket radio wiring harness supports compatible steering wheel controls, backup camera or 360 camera, factory Bose amplifier, USB, and door open hint after an Android radio upgrade. If your vehicle has Bose AMP, connect the AMP CONT line to get sound. ^^ Plug and Play Connection- This car stereo wiring harness is designed for plug-in installation on compatible setups. It helps connect your aftermarket Android radio to the original vehicle harness without cutting or soldering factory wires. ^^ Canbus Setup Required- Connect the CANBUS box and select the matching CANBUS protocol on your Android stereo so compatible camera, steering wheel control, USB, and door hint functions can work. Actual function depends on trim, radio setup, and wiring match. ^^ Factory Camera Support- This radio wire harness supports compatible factory backup camera or 360 camera systems when the vehicle, radio, and CANBUS settings match.

Connect the yellow male RCA camera plug to the car radio CAM-IN line, then shift into reverse to activate the display. ^^ Fitment And Setup Support- Not sure if this radio adapter fits your Nissan? Contact us through the order page with your model, year, trim, dashboard photo, factory radio rear ports, and stereo 16-pin socket. Technical setup support is available before or after purchase.