The SATAM2T4 can provide extra 4 port SATA III to any free M. 2 slot with PCIe Gen3x1 of bandwidth. Plug and play supported. No additional software installation or settings required.
Note: M. 2 module are neither hot-swappable nor hot-pluggable. Performain hot-swap or hot-plug may damage the modules.
Features:
Connect four SATA drives to a M. 2 B+M Key Connection
Plug and play supported, no additional software installation or setting required
Can support Port Multiplier that is not in a RAID configuration. Compatible with SATA hard drives and solid state drives and computer systems with SATA connection
1-Lane M. 2 PCIe 3.0 interface (B and M Key). Complies with PCI Express Base Specification Revision 3.0
This card is only design for storage use only, can not boot any OS / System drives
Product Specification:
Chipset: ASMedia ASM10644
Form-Factor: M. 2 2280
Interface: SATA
Ports: 4
Bootable: No
Hot Swap Capability: No
Port Multiplier: Yes
Type and Rate: SATA III (6 Gbps)
Connector Type (s): M. 2 (B+M Key)
Internal Ports: SATA (7 pin, Data) Plug
OS Compatibility: Windows 10/11
System and Cable Requirements: PCI Express enabled computer with an available PCI Express x1, x4, x8 or x16 slot
Environmental: Humidity 20~80% RH, Operating Temperature 5°C to 50°C (41°F to 122°F), Storage Temperature -25°C to 70°C (-13°F to 158°F)