OLOy DDR4 RAM 32GB (1x32GB) 3200 MHz CL22 1.2V 260-Pin Laptop SODIMM (MD4S3232220BZ1SH)

OLOy MemoryOLOy DDR4 RAM 32GB (1x32GB) 2133-2933MHz 3200 MHz CL22 1.2V 260-Pin Laptop SODIMM (MD4S3232220BZ1SH) 100% Burn-In TestMulti-Platform Burn-In TestAdoption of original chipsApprove by Leading MB ManufacturersUnique Semiconductor Equipment Chips Sorting TechnologyOLOy Lifetime WarrantyAll OLOy brand memory module products enjoy lifetime warranties, that is, free maintenance service is valid for the life of the product. Except where prohibited by applicable local law, this warranty is limited to the original purchaser and is non-transferable. This warranty gives you specific legal rights, and you may also have other rights that may vary under local laws.

Installation note for 3200 Mhz SODIMM1. Shut down your system. After your system has been powered off, unplug the power cable and then remove the battery from your laptop (computer). 2. Discharge residual power by pressing and holding the power button for 3-5 seconds. 3. Locate and access the memory slots on your laptop using your owner's manual. 4. Remove existing modules as needed. Maximize the performance of your system by filling each slot with new modules. 5. Align the notches on the module with the ridges in the slot.

Firmly push the module in at a 45 angle, then push down until the clips on the side of the slot snap into place. 6. Once your new modules have been installed, reassemble your system and reconnect the battery. Installation is now complete. 7. Push the power button to power on you laptop (computer). For some laptop, it takes 3~5 minutes for the first boot, please wait for a moment.