PoE Ethernet/USB HUB HAT Board with ABS Case Box for Raspberry Pi Zero 2W/2WH/Zero, PoE 802.3af-Compliant Ethernet Port and 3X USB 2.0 Ports Compatible with USB 2.0/1.1

Overview
The PoE-ETH-USB-HUB-BOX is a HUB kit with Waveshare PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3 af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.

Features
PoE Ethernet / USB HUB HAT with BOX, Compatible with
Raspberry Pi Zero series: Designed for Raspberry Pi Zero, compatible with Zero series boards
Extended Ethernet port: USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation
PoE (Power over Ethernet) feature, 802.3 af-compliant
Fully isolated SMPS (Switch Mode Power Supply)
3x extended USB ports, compatible with USB 2.0 / 1.1
Angle rounded design, smooth hand feeling, "simple snap" case lid
Quality ABS material, dull polish surface, anti-fingerprint
Comes with two different lids, changing as you like

Specifications

PoE power input: 37V ~ 57V DC in
Power output: 5V 2.5A DC out
Network standard: IEEE 802.3 af-compliant PoE

User Manual/How-to-use: //bit. ly/3MpuA36

Package Content
PoE/ETH/USB HUB HAT kit x1
ABS case x1
Rubber feet 4PCS x1
Screws pack x1

FAQ:
Question: Why doesn't the Raspberry Pi recognize USB devices?
Answer: Please connect the USB HUT interface to the PC by USB cable to check if the HUB can be recognized. If the HUB can be recognized by PC but not the Pi, please check if you have connected the USB connector tightly. And if you have set the USB port of Pi zero for networking, it cannot be used with the USB HUB either.