Your Browsing History
Meet Your Seller
waveshare ESP32-S3 2.06inch AMOLED Touch Watch Development Board Based on ESP32-S3R8 Microcontroller, Supports Offline Voice Recognition and AI Speech Interaction
- Attention: This is a wearable watch style development board that is not a standard pre configured smartwatch. It is a DIY module that requires customers to develop their own applications to fully utilize its features. This product is aimed at technology enthusiasts, developers or programming enthusiasts, manufacturers, etc.
- High-performance Microcontroller:Based on the ESP32-S3R8 microcontroller,Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Integrate Multiple Function Modules:it integrates a 2.06inch AMOLED capacitive touch display, 6-axis IMU, RTC chip, audio codec chip, power management IC, and so on.
- Diverse Application Scenarios:Onboard ES8311 Audio Codec Chip And ES7210 Echo Cancellation Circuit. Meet Daily Audio Application Scenarios,such as Audio Playback and Audio Capture.Supports Offline Voice Recognition And AI Speech Interaction.All
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Features
The ESP32-S3-Touch-AMOLED- 2.06 is a high-performance, wearable watch-style development board designed by Waveshare. Comes with a custom-designedbr> case with a smartwatch-like appearance, making it ideal for prototyping and functional verification of wearable applications.
Supports 2.4GH z Wi-Fi ( 802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 32MB Flash memory
Type-C connector, improving device compatibility, easier to use
Onboard 2.06 inch AMOLED capacitive touch display for clear color picture display, 410 × 502 resolution, 16.7M color
Built-in CO5300 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.
Onboard PCF85063 RTC chip, powered by Lithium battery through AXP2101 chip for uninterrupted power supply
Onboard PWR and BOOT programmable buttons for easy custom function development
Onboard 3.7V MX 1.25 Lithium battery recharge/discharge header
Onboard reserved pads of 1 × I2C, 1 × UART and 1 × USB interfaces, for connecting peripherals and debugging
Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.
Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.
Package Content
ESP32-S3-Touch-AMOLED- 2.06 x1
Watch straps ×1
MX 1.25 Lithium battery ×1
The ESP32-S3-Touch-AMOLED- 2.06 is a high-performance, wearable watch-style development board designed by Waveshare. Comes with a custom-designedbr> case with a smartwatch-like appearance, making it ideal for prototyping and functional verification of wearable applications.
Supports 2.4GH z Wi-Fi ( 802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 32MB Flash memory
Type-C connector, improving device compatibility, easier to use
Onboard 2.06 inch AMOLED capacitive touch display for clear color picture display, 410 × 502 resolution, 16.7M color
Built-in CO5300 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources
Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.
Onboard PCF85063 RTC chip, powered by Lithium battery through AXP2101 chip for uninterrupted power supply
Onboard PWR and BOOT programmable buttons for easy custom function development
Onboard 3.7V MX 1.25 Lithium battery recharge/discharge header
Onboard reserved pads of 1 × I2C, 1 × UART and 1 × USB interfaces, for connecting peripherals and debugging
Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.
Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.
Package Content
ESP32-S3-Touch-AMOLED- 2.06 x1
Watch straps ×1
MX 1.25 Lithium battery ×1
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by DSKL Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...